Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Cake torting knife guides
By Krypto
Complexity
Medium (set)
Kitchen Baking & sweets
0
Cake torting knife guides
MAIN PURPOSE: Cut cake layers level and even
Stand a guide on each side of the cake, push a long bread knife through the matching slots (20, 35 or 50 mm up) and turn the cake against the blade: the layers come out perfectly level and even, ready to fill. Print two.
Printing notes
3.5 cm³
Volume
4.3 g
Est. weight
4,956
Triangles

Print two. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Fermentation follower disc
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Fermentation follower disc
MAIN PURPOSE: Keep fermenting vegetables submerged
Keeps sauerkraut and kimchi under the brine in a wide-mouth jar: the disc presses the cabbage down, the holes let brine rise above it, and the knob lifts it out without fishing with your fingers.
Printing notes
24.2 cm³
Volume
30.0 g
Est. weight
1,496
Triangles

For food contact, print in a food-safe PETG and wash by hand. Prints flat as a plate, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Fresh pasta nest drying tray
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Fresh pasta nest drying tray
MAIN PURPOSE: Dry fresh pasta nests
Dry six nests of fresh tagliatelle or pappardelle: each nest sits in its own rounded cell and the perforated floor lets air reach underneath, so the pasta dries evenly without sticking.
Printing notes
110.3 cm³
Volume
136.8 g
Est. weight
18,500
Triangles

For food contact, print in a food-safe PETG and wash by hand. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Temaki hand roll stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Temaki hand roll stand
MAIN PURPOSE: Serve sushi hand rolls upright
Holds four hand-rolled sushi cones upright at the table so the filling stays inside and the nori stays crisp while everyone rolls their own.
Printing notes
55.2 cm³
Volume
68.4 g
Est. weight
1,676
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Egg yolk separator cup
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Egg yolk separator cup
MAIN PURPOSE: Separate egg yolks from whites
Crack an egg into the cup: the yolk stays in the middle while the white slips through the four slots into the bowl below. The handle hooks over the bowl rim.
Printing notes
24.4 cm³
Volume
30.2 g
Est. weight
4,280
Triangles

For food contact, print in a food-safe PETG and wash by hand. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Espresso puck screen and distribution tool dock
By Krypto
Complexity
Medium
Kitchen Coffee & tea
0
Espresso puck screen and distribution tool dock
MAIN PURPOSE: Store espresso puck screen and WDT tool
Parks a 58 mm puck screen flat in the left bay and stands a needle distribution tool upright in the round cup, so both stay clean beside the machine.
Printing notes
57.4 cm³
Volume
71.1 g
Est. weight
1,696
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Macaron piping guide
By Krypto
Complexity
Medium
Kitchen Baking & sweets
0
Macaron piping guide
MAIN PURPOSE: Pipe macarons and meringues to size
Slide it under baking paper and pipe each macaron onto one of the raised circles, so a whole tray comes out the same size and bakes evenly.
Printing notes
111.3 cm³
Volume
138.0 g
Est. weight
5,260
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Jar lid gripper pad
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Jar lid gripper pad
MAIN PURPOSE: Open stuck jar lids
A ribbed pad that gives a firm grip on stuck jar lids: lay it over the lid and twist. It helps anyone with arthritis or wet hands, and doubles as a coaster.
Printing notes
56.1 cm³
Volume
69.6 g
Est. weight
9,440
Triangles

Print in TPU for the best grip. Prints flat as a plate, no supports.

AR view Open in app
Preview of Rice rinsing bowl with drain wall
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Rice rinsing bowl with drain wall
MAIN PURPOSE: Rinse rice and grains
Rinse rice in the bowl, then tip it towards the low perforated side: the cloudy water pours out through the small holes and the grains stay behind.
Printing notes
88.8 cm³
Volume
110.1 g
Est. weight
13,592
Triangles

For food contact, print in a food-safe PETG and wash by hand. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bread slicing guide
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Bread slicing guide
MAIN PURPOSE: Slice bread evenly
Cut even slices from a home-baked loaf: set the loaf in the open-ended frame and saw down through the facing slots, and every slice comes out the same thickness.
Printing notes
71.1 cm³
Volume
88.1 g
Est. weight
1,372
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan