Separate egg yolks from whites
Crack an egg into the cup: the yolk stays in the middle while the white slips through the four slots into the bowl below. The handle hooks over the bowl rim.
For food contact, print in a food-safe PETG and wash by hand.
Prints as shown on its floor, no supports.
Filament: at most about 30.2 g of PLA printed solid (roughly $0.60 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The egg yolk separator cup model measures Ø 72 mm, 28 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. For food contact, print in a food-safe PETG and wash by hand. Prints as shown on its floor, no supports.
At most about 30.2 g of PLA (24.4 cm³ printed solid), roughly $0.60 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the egg yolk separator cup model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.