Serve sushi hand rolls upright
Holds four hand-rolled sushi cones upright at the table so the filling stays inside and the nori stays crisp while everyone rolls their own.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 68.4 g of PLA printed solid (roughly $1.37 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The temaki hand roll stand model measures 200 × 70 × 50 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 68.4 g of PLA (55.2 cm³ printed solid), roughly $1.37 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the temaki hand roll stand model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.