Showcase
Models Showcase
Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category
MAIN PURPOSE: Mark where a picture hook must go
Hang the picture's wire or cord in the notch, push a panel pin through the hole just below it, then hold the picture where it should go and press: the pin pricks the exact spot for the hook, so the picture hangs where you held it, first time, with no measuring.
Printing notes
11.2 cm³
Volume
13.9 g
Est. weight
288
Triangles
Prints flat as a plate, no supports.
MAIN PURPOSE: Space tiles evenly
Cross-shaped spacers that keep wall and floor tiles evenly apart while the adhesive sets, so the grout lines come out straight.
Printing notes
0.7 cm³
Volume
0.9 g
Est. weight
44
Triangles
Print a batch; the plate thickness sets the grout gap. Prints flat as a plate, no supports.
MAIN PURPOSE: Set even gaps between deck boards
Hang it over a joist between two deck boards: the 5 mm blade sets an even drainage gap while you screw the board down.
Printing notes
21.4 cm³
Volume
26.5 g
Est. weight
416
Triangles
Print flat; print four.
MAIN PURPOSE: Organise a uniform pocket
Drops into a scrubs or tunic pocket and keeps pens, a penlight, scissors and tape upright in their own slots, so nothing falls out when you bend down.
Printing notes
14.0 cm³
Volume
17.3 g
Est. weight
1,028
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Dispense ribbon from reels
Dispenses up to three ribbon reels for a florist or gift-wrapping table: slide a rod through the side holes and the reels, and pull each ribbon out through its front slot.
Printing notes
46.0 cm³
Volume
57.0 g
Est. weight
3,284
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Let pupils leave the classroom with a pass
A tough hall pass for school corridors: hang it on a lanyard through the hole, and the class name goes in the raised text.
Printing notes
31.1 cm³
Volume
38.6 g
Est. weight
8,792
Triangles
Prints flat as a plate, no supports.
MAIN PURPOSE: Support work for jewellery sawing and filing
Clamp it to the bench edge to support silver sheet and wire while you saw, file and drill; the V cut-out lets the saw blade pass right through.
Printing notes
44.4 cm³
Volume
55.0 g
Est. weight
476
Triangles
Prints as shown on its outline, no supports.
MAIN PURPOSE: Keep opened sealant tubes from drying out
Push one onto a cut caulk or sealant nozzle and the tube stays usable for weeks instead of curing solid.
Printing notes
1.6 cm³
Volume
2.0 g
Est. weight
680
Triangles
Print a handful; TPU seals best. Prints as shown on its floor, no supports.
MAIN PURPOSE: Count tablets accurately
A pharmacist-style counting tray: slide tablets across the flat deck in fives with a spatula into the channel, then pour them into the bottle through the corner notch.
Printing notes
42.2 cm³
Volume
52.3 g
Est. weight
1,076
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Protect a stethoscope in a bag
A hard case with a fitted recess for a stethoscope, with the chest piece, tubing and ear tips each in their place, so it rides in a bag without tangling or getting crushed.
Printing notes
867.0 cm³
Volume
1,075.1 g
Est. weight
6,100
Triangles
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.