Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Golden-ratio stepped valet
By Krypto
Complexity
Advanced
Others Geometric & decorative
0
Golden-ratio stepped valet
MAIN PURPOSE: Organise pocket items on a sideboard
A valet tray built from golden rectangles, each one 1.618 times the next, stepped up towards one corner: keys and coins in the big tray, rings and earbuds on the higher ones.
Printing notes
156.7 cm³
Volume
194.3 g
Est. weight
540
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Hexagon cork coaster
By Krypto
Complexity
Simple
Others Geometric & decorative
0
Hexagon cork coaster
MAIN PURPOSE: Protect tables under drinks
A hexagonal coaster with a shallow recess for a 90 mm cork or felt disc; several of them tessellate into a honeycomb on the table.
Printing notes
21.9 cm³
Volume
27.2 g
Est. weight
88
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Wave relief wall tile
By Krypto
Complexity
Medium
Others Geometric & decorative
0
Wave relief wall tile
MAIN PURPOSE: Decorate a wall with modular relief tiles
A square relief tile with a deep wave pattern: hang a set on the wall turning each one by 90 degrees to make your own pattern, and paint them or print them in two colours.
Printing notes
97.0 cm³
Volume
120.3 g
Est. weight
2,216
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Spinning zoetrope drum
By Krypto
Complexity
Multi-part assembly
Others Geometric & decorative
0
Spinning zoetrope drum
MAIN PURPOSE: Animate drawings with an optical toy
A zoetrope that spins on BBs: tape a strip of twelve drawings round the inside below the slits, spin the drum and watch through the slits as the pictures come to life.
Printing notes
346.3 cm³
Volume
429.4 g
Est. weight
8,440
Triangles

Prints as shown on its floor, no supports. The turntable ring prints separately and runs on 6 mm BBs.

AR view Open in app
Preview of Lithophane light box
By Krypto
Complexity
Simple
Others Geometric & decorative
0
Lithophane light box
MAIN PURPOSE: Display a lithophane with a light behind it
Shows off a 100 mm lithophane: slide the printed panel into the slot behind the front window, put an LED tea light inside, and the picture glows; a USB light can come in through the back hole.
Printing notes
55.2 cm³
Volume
68.4 g
Est. weight
1,828
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Minimal wall clock face
By Krypto
Complexity
Simple
Others Geometric & decorative
0
Minimal wall clock face
MAIN PURPOSE: Make a wall clock
A clock face for a standard quartz movement: push the spindle through the centre hole, fit the nut and hands, and hang it from the movement's own hook.
Printing notes
180.3 cm³
Volume
223.6 g
Est. weight
6,044
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Wind chime top
By Krypto
Complexity
Medium
Others Geometric & decorative
0
Wind chime top
MAIN PURPOSE: Build a wind chime
The top disc of a wind chime: hang five lengths of copper pipe or bamboo from the outer holes, a striker from the centre, and the whole chime from the hanging hole.
Printing notes
37.6 cm³
Volume
46.6 g
Est. weight
1,484
Triangles

Print in ASA or PETG for outdoors. Prints flat as a plate, no supports.

AR view Open in app
Preview of Planter bookend
By Krypto
Complexity
Simple
Others Geometric & decorative
0
Planter bookend
MAIN PURPOSE: Support books while growing a plant
A heavy planter that also holds up a row of books: fill it with soil and a trailing plant, and its flat side stops the books leaning over.
Printing notes
58.5 cm³
Volume
72.6 g
Est. weight
1,340
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Hanging planter for trailing plants
By Krypto
Complexity
Medium
Others Geometric & decorative
0
Hanging planter for trailing plants
MAIN PURPOSE: Hang a trailing plant
A square planter that hangs from four cords threaded through the holes under the rim, for a trailing pothos or string-of-pearls; slip the plant in its nursery pot inside so it can be lifted out to water.
Printing notes
53.6 cm³
Volume
66.5 g
Est. weight
3,536
Triangles

Print in PETG and use 3 mm cord; knot the cords inside each hole. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Ribbed square vase
By Krypto
Complexity
Medium
Others Geometric & decorative
0
Ribbed square vase
MAIN PURPOSE: Display dried or fresh flowers
A square vase with fine vertical ribs that catch the light; stand dried grasses in it, or a glass of water for fresh flowers.
Printing notes
18.7 cm³
Volume
23.1 g
Est. weight
138,976
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan