Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Plate-rim wine glass clip
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Plate-rim wine glass clip
MAIN PURPOSE: Hold a wine glass on a plate at a buffet
Push the slot onto the rim of a dinner plate and slide the wine glass stem into the keyhole: at a standing buffet you hold the plate and the glass in one hand and keep the other free for the fork. The 6.5 mm snap mouth keeps the stem from slipping out.
Printing notes
7.6 cm³
Volume
9.5 g
Est. weight
312
Triangles

Print in PETG; check the 6.5 mm slot against your plate rim. Prints flat as a plate, no supports.

AR view Open in app
Preview of Opened tin can cover
By Krypto
Complexity
Simple
Kitchen Food storage
0
Opened tin can cover
MAIN PURPOSE: Cover an opened tin in the fridge
Snap the cover over the rim of an opened 73 mm tin of pet food, beans or tomato puree before it goes in the fridge: no smell, no cling film, and the flat top lets you stand another tin on it. Rinse and reuse.
Printing notes
13.5 cm³
Volume
16.8 g
Est. weight
680
Triangles

Food-safe PETG or TPU for a tighter snap. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Loaf cut-end cap
By Krypto
Complexity
Simple
Kitchen Food storage
0
Loaf cut-end cap
MAIN PURPOSE: Keep a cut loaf fresh without a bag
Stand a cut sourdough or bloomer cut-face down in the cap on the bread board: the cut end stays soft and the crust stays crisp, which a plastic bag never manages. 150 x 110 mm fits most round and oval loaves.
Printing notes
60.3 cm³
Volume
74.8 g
Est. weight
680
Triangles

Food-safe PETG. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Tea bag squeeze tongs
By Krypto
Complexity
Simple
Kitchen Coffee & tea
0
Tea bag squeeze tongs
MAIN PURPOSE: Lift and squeeze a hot tea bag cleanly
Lift the tea bag out of the mug with the paddles, give it a squeeze over the cup and drop it in the bin: the U spring opens the tongs again on its own, so no burnt fingers and no spoon dripping on the worktop.
Printing notes
10.2 cm³
Volume
12.6 g
Est. weight
604
Triangles

Food-safe PETG. Prints flat as a plate, no supports.

AR view Open in app
Preview of Bread lame with blade tongue
By Krypto
Complexity
Simple
Kitchen Baking & sweets
0
Bread lame with blade tongue
MAIN PURPOSE: Score bread dough before baking
Thread a double-edged razor blade onto the 3.2 mm tongue: the blade bows into a gentle curve that cuts a clean ear into the loaf when you score it at a shallow angle. The long handle keeps your knuckles off the dough.
Printing notes
4.7 cm³
Volume
5.8 g
Est. weight
164
Triangles

Print in PETG; slide blades on and off carefully. Prints flat as a plate, no supports.

AR view Open in app
Preview of Slice-and-bake cookie log former
By Krypto
Complexity
Simple
Kitchen Baking & sweets
0
Slice-and-bake cookie log former
MAIN PURPOSE: Shape cookie dough into an even log
Line the round-bottomed trough with cling film, press in the cookie dough and chill it: the log comes out evenly round along its whole length, so every slice bakes into a cookie of the same size. The open ends let the log slide straight out.
Printing notes
33.4 cm³
Volume
41.4 g
Est. weight
1,364
Triangles

Food-safe PETG. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Drawer-front peelings bag hook
By Krypto
Complexity
Simple (set)
Kitchen Kitchen organisers
0
Drawer-front peelings bag hook
MAIN PURPOSE: Hang a scraps bag under the chopping board
Hang a pair over the front of an open kitchen drawer and hook a carrier bag or caddy liner by its handles: peelings and trimmings go straight off the board edge into the bag, and the bag goes to the compost when you close the drawer. Print two.
Printing notes
9.7 cm³
Volume
12.1 g
Est. weight
988
Triangles

Print two in PETG; sized for 18 mm drawer fronts. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Mixing bowl tilt ring
By Krypto
Complexity
Simple
Kitchen Kitchen organisers
0
Mixing bowl tilt ring
MAIN PURPOSE: Hold a mixing bowl steady at an angle
Set a mixing bowl in the grippy ring and lean it against the rim at any angle: the bowl stays put while you whisk or fold one-handed, and tilting it gathers the batter where the whisk can get at it.
Printing notes
160.2 cm³
Volume
198.7 g
Est. weight
840
Triangles

Print in TPU. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Flour canister levelling bar
By Krypto
Complexity
Simple
Kitchen Kitchen organisers
0
Flour canister levelling bar
MAIN PURPOSE: Level measuring scoops over the canister
Hook the bar across the mouth of a flour canister or a rolled-down bag (rims about 137 mm apart) and drag each scoop along its straight edge: the measure is level every time and the excess falls back into the canister instead of onto the worktop.
Printing notes
7.1 cm³
Volume
8.8 g
Est. weight
236
Triangles

Food-safe PETG. Prints flat as a plate, no supports.

AR view Open in app
Preview of Split keyboard tenting wedges
By Krypto
Complexity
Simple (set)
Desk & office Desk organisation
0
Split keyboard tenting wedges
MAIN PURPOSE: Tilt split keyboard halves for neutral wrists
Set a wedge under the outer edge of each half of a split keyboard: the 16 degree slope rolls your forearms towards a handshake position, which eases wrist and forearm strain, and the lip at the low end stops the keyboard sliding off. Print two or four.
Printing notes
55.7 cm³
Volume
69.0 g
Est. weight
384
Triangles

Print on its side as it comes; add rubber feet.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan