Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Rice rinsing bowl with drain wall
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Rice rinsing bowl with drain wall
MAIN PURPOSE: Rinse rice and grains
Rinse rice in the bowl, then tip it towards the low perforated side: the cloudy water pours out through the small holes and the grains stay behind.
Printing notes
88.8 cm³
Volume
110.1 g
Est. weight
13,592
Triangles

For food contact, print in a food-safe PETG and wash by hand. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bread slicing guide
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Bread slicing guide
MAIN PURPOSE: Slice bread evenly
Cut even slices from a home-baked loaf: set the loaf in the open-ended frame and saw down through the facing slots, and every slice comes out the same thickness.
Printing notes
71.1 cm³
Volume
88.1 g
Est. weight
1,372
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Paper towel stand
By Krypto
Complexity
Medium
Kitchen Food storage
0
Paper towel stand
MAIN PURPOSE: Hold a kitchen roll on the counter
A stand for a kitchen roll: drop the roll over the post and tear sheets off one-handed; the wide base keeps it upright when you pull.
Printing notes
115.3 cm³
Volume
142.9 g
Est. weight
1,360
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Chocolate bar mould
By Krypto
Complexity
Medium
Kitchen Baking & sweets
0
Chocolate bar mould
MAIN PURPOSE: Mould chocolate bars
Makes four snap-apart bars of homemade chocolate: pour tempered chocolate into the cells, tap out the bubbles, chill, and flex the mould to release.
Printing notes
45.9 cm³
Volume
56.9 g
Est. weight
4,180
Triangles

Print in food-safe PETG; the smoother the top surface, the glossier the chocolate. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Heart cookie stamp
By Krypto
Complexity
Medium
Kitchen Baking & sweets
0
Heart cookie stamp
MAIN PURPOSE: Decorate cookies and marzipan
Press it into cookie dough or a ball of marzipan to emboss a heart before baking; the knob on the back makes it easy to push straight down. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
12.1 cm³
Volume
15.0 g
Est. weight
1,028
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Envelope addressing guide
By Krypto
Complexity
Medium
Desk & office Paper & bookbinding
0
Envelope addressing guide
MAIN PURPOSE: Write straight addresses on envelopes
Lay the guide over a DL envelope and write the address through the four slots, so every line comes out straight and evenly spaced; the corner window shows where the stamp goes. Ideal for wedding invitations and cards.
Printing notes
40.4 cm³
Volume
50.1 g
Est. weight
8,940
Triangles

Print flat; at 2 mm thin the pen reaches the paper easily.

AR view Open in app
Preview of Poster hanger rail
By Krypto
Complexity
Medium (set)
Desk & office Paper & bookbinding
0
Poster hanger rail
MAIN PURPOSE: Hang posters without frames
Print two and sandwich the top of a poster or a print between them with four small bolts; hang it from the centre hole with a string or a picture hook.
Printing notes
18.8 cm³
Volume
23.3 g
Est. weight
1,492
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Shop vacuum hose step adapter
By Krypto
Complexity
Medium
Workshop Tools & jigs
0
Shop vacuum hose step adapter
MAIN PURPOSE: Connect a vacuum hose to a tool dust port
Joins a 58 mm vacuum hose to a tool with a smaller 40 mm dust port: one end fits inside the hose, the other over the port, with a step between them. Wrap tape round a loose joint.
Printing notes
27.7 cm³
Volume
34.3 g
Est. weight
1,696
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Epoxy mixing palette
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Epoxy mixing palette
MAIN PURPOSE: Mix small batches of epoxy and resin
Six shallow round wells for mixing small batches of two-part epoxy or resin pigment; cured epoxy flexes out of the smooth, coved wells.
Printing notes
44.1 cm³
Volume
54.6 g
Est. weight
1,700
Triangles

PETG releases cured epoxy well; PLA does not. Prints as shown on its floor, no supports.

AR view Open in app
Preview of PTFE tube square-cut guide
By Krypto
Complexity
Medium
Workshop Maker & 3D printing
0
PTFE tube square-cut guide
MAIN PURPOSE: Cut PTFE tube square for 3D printers
Cuts 4 mm PTFE tube perfectly square for a leak-free hotend joint: push the tube through the side holes and press a sharp blade straight down through the slot.
Printing notes
5.4 cm³
Volume
6.7 g
Est. weight
1,352
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan