Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Mini roller paint tray
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Mini roller paint tray
MAIN PURPOSE: Load mini rollers with paint
A tray for 10 cm mini rollers: paint goes in the deep front well behind a low dam, and you roll off the excess on the ribbed floor behind it.
Printing notes
79.6 cm³
Volume
98.7 g
Est. weight
11,252
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Paint drying dust cover
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Paint drying dust cover
MAIN PURPOSE: Keep dust off drying painted miniatures
Lower it over freshly painted miniatures or parts: dust stays off while the slotted ends let the solvents escape. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
117.3 cm³
Volume
145.4 g
Est. weight
2,832
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Airbrush cleaning pot
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Airbrush cleaning pot
MAIN PURPOSE: Catch airbrush cleaner spray safely
Spray cleaner through the airbrush into the pot instead of the air: push the nozzle into the port in the top, and two small vents let air out while a sponge under the top catches the mist.
Printing notes
92.1 cm³
Volume
114.2 g
Est. weight
2,048
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Component lead bending gauge
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Component lead bending gauge
MAIN PURPOSE: Bend component leads to breadboard spacing
Bend resistor and diode leads to fit exactly 4 to 9 breadboard holes apart: lay the part across the step with the right number and fold both leads down over its edges.
Printing notes
10.2 cm³
Volume
12.6 g
Est. weight
6,948
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Solder spool dispenser
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Solder spool dispenser
MAIN PURPOSE: Feed solder wire from its spool
A round canister the solder spool turns inside, feeding the wire out through a small hole in the fitted top, on round feet.
Printing notes
63.1 cm³
Volume
78.3 g
Est. weight
1,720
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Wall spray bottle caddy
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Wall spray bottle caddy
MAIN PURPOSE: Hang spray bottles trigger-ready on the wall
Three bays for spray bottles with a low front so the triggers are easy to grab, mounted with keyholes.
Printing notes
141.2 cm³
Volume
175.1 g
Est. weight
1,520
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Car wash bucket grit guard
By Krypto
Complexity
Medium
Workshop Car & bike
0
Car wash bucket grit guard
MAIN PURPOSE: Trap grit below your wash mitt
A honeycomb-perforated disc on feet that sits in the bottom of a wash bucket and keeps grit away from your mitt.
Printing notes
180.4 cm³
Volume
223.7 g
Est. weight
5,516
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Heat-shrink tubing graduated lanes
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Heat-shrink tubing graduated lanes
MAIN PURPOSE: Sort heat-shrink tubing by diameter
Six lanes that get wider from left to right, for heat-shrink tubing from the thinnest to the thickest, with a label slot.
Printing notes
98.2 cm³
Volume
121.7 g
Est. weight
1,124
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Parts washing basket
By Krypto
Complexity
Medium
Workshop Tools & jigs
0
Parts washing basket
MAIN PURPOSE: Dunk small parts in cleaner
A basket with honeycomb perforations in the floor and walls and handle slots, for dunking small parts in cleaner.
Printing notes
66.6 cm³
Volume
82.6 g
Est. weight
18,228
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Blade disposal bank
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Blade disposal bank
MAIN PURPOSE: Safely dispose of used blades
A sealed bank for used craft and utility blades: they go in through the slot in the top and never come back out.
Printing notes
30.7 cm³
Volume
38.0 g
Est. weight
6,876
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan