Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Place value counting tray
By Krypto
Complexity
Medium
Others Science & education
0
Place value counting tray
MAIN PURPOSE: Teach place value with counters
A maths tray for hundreds, tens and ones: sort counters, sticks or beads into the three columns to build numbers and practise carrying and borrowing.
Printing notes
75.6 cm³
Volume
93.7 g
Est. weight
2,332
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Butterfly spreading board
By Krypto
Complexity
Simple
Others Science & education
0
Butterfly spreading board
MAIN PURPOSE: Set insect specimens for display
Set butterflies and moths for a collection: the insect's body sits in the central channel while the wings are pinned flat on foam strips either side until they dry.
Printing notes
94.2 cm³
Volume
116.8 g
Est. weight
1,016
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Spectrophotometer cuvette rack
By Krypto
Complexity
Advanced
Others Science & education
0
Spectrophotometer cuvette rack
MAIN PURPOSE: Hold laboratory cuvettes in order
Holds eight standard 12.5 mm square cuvettes upright in a row, in the order you will read them, so samples never get mixed up on the bench.
Printing notes
22.3 cm³
Volume
27.7 g
Est. weight
6,288
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Pythagoras pour-proof tray
By Krypto
Complexity
Medium
Others Science & education
0
Pythagoras pour-proof tray
MAIN PURPOSE: Demonstrate Pythagoras' theorem by volume
Proves a² + b² = c² with rice or sand: fill the two smaller square cups level, pour both into the largest square, and it fills exactly to the same level.
Printing notes
46.1 cm³
Volume
57.2 g
Est. weight
6,444
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Kaleidoscope body for three mirror strips
By Krypto
Complexity
Multi-part assembly
Others Science & education
0
Kaleidoscope body for three mirror strips
MAIN PURPOSE: Make a kaleidoscope
Build a kaleidoscope: glue three mirror strips into the triangular tube, drop beads under the lid printed in clear or white plastic, and look through the eyehole at the other end towards the light.
Printing notes
130.2 cm³
Volume
161.4 g
Est. weight
232
Triangles

Print the lid in clear or white so light comes through. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Weather sensor radiation shield
By Krypto
Complexity
Multi-part assembly
Others Science & education
0
Weather sensor radiation shield
MAIN PURPOSE: Shield a weather sensor from sun and rain
A vented housing that keeps sun and rain off a DIY weather station's temperature and humidity sensor while air flows through the slots; the roof overlaps the walls and the floor has a cable hole and two screw holes.
Printing notes
67.7 cm³
Volume
83.9 g
Est. weight
7,620
Triangles

Print in white ASA or PETG for outdoor use. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Constant-width roller
By Krypto
Complexity
Simple (set)
Others Science & education
0
Constant-width roller
MAIN PURPOSE: Demonstrate curves of constant width
Print three of these Reuleaux rollers, lay a book on top and roll it along: the book glides perfectly level even though the rollers are not round, a classic demonstration of curves of constant width.
Printing notes
22.2 cm³
Volume
27.5 g
Est. weight
780
Triangles

Prints as shown on its outline, no supports.

AR view Open in app
Preview of Eclipse viewer frame
By Krypto
Complexity
Medium
Others Science & education
0
Eclipse viewer frame
MAIN PURPOSE: Hold solar viewing film safely
A sturdy hand-held frame for a sheet of certified solar viewing film (ISO 12312-2): tape the film behind the window, then hold it by the handle to watch an eclipse.
Printing notes
30.7 cm³
Volume
38.1 g
Est. weight
2,304
Triangles

Use only certified solar filter film in the window. Prints flat as a plate, no supports.

AR view Open in app
Preview of Water clock
By Krypto
Complexity
Medium
Others Science & education
0
Water clock
MAIN PURPOSE: Measure time with dripping water
An ancient-style water clock: fill the top cup, and water drips through the tiny hole into the lower cup, rising past the minute marks on the front.
Printing notes
31.7 cm³
Volume
39.3 g
Est. weight
3,376
Triangles

Calibrate the marks with a stopwatch for your print. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Model rocket fin alignment jig
By Krypto
Complexity
Simple
Others Science & education
0
Model rocket fin alignment jig
MAIN PURPOSE: Align model rocket fins for gluing
Holds three fins at exactly 120 degrees round a 24 mm body tube while the glue sets: slide the tube through the centre and the fins into the slots.
Printing notes
82.5 cm³
Volume
102.3 g
Est. weight
540
Triangles

Prints as shown on its outline, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan