Weather sensor radiation shield — 3D-printable model preview

AR view

Science & education Multi-part assembly

Weather sensor radiation shield

Shield a weather sensor from sun and rain

A vented housing that keeps sun and rain off a DIY weather station's temperature and humidity sensor while air flows through the slots; the roof overlaps the walls and the floor has a cable hole and two screw holes.

Customize this model

Size: 100 × 100 × 110 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 67.7 cm³
Est. weight (PLA): 83.9 g
Parts to print: 2
Category: Science & education
Made by: Krypto
Built in: 31 steps

What’s in it

Rectangular, 100 × 100 × 110 mm, with 2.4 mm walls
3 holes in the floor
1 patterned wall panel (cut-out)
Telescoping lid (prints separately)

How to print it

Print in white ASA or PETG for outdoor use.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 83.9 g of PLA printed solid (roughly $1.68 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the weather sensor radiation shield model?

The weather sensor radiation shield model measures 100 × 100 × 110 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in white ASA or PETG for outdoor use. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 83.9 g of PLA (67.7 cm³ printed solid), roughly $1.68 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More science & education

Kaleidoscope body for three mirror strips

Make a kaleidoscope

Multi-part assembly

Eclipse viewer frame

Hold solar viewing film safely

Medium

Water clock

Measure time with dripping water

Medium

Newton colour wheel spinner

Show that the spectrum colours mix to white

Simple

Pythagoras pour-proof tray

Demonstrate Pythagoras' theorem by volume

Medium

Spectrophotometer cuvette rack

Hold laboratory cuvettes in order

Advanced

Butterfly spreading board

Set insect specimens for display

Simple

Place value counting tray

Teach place value with counters

Medium

See all 71 in Science & education

Make it fit your space

Change the size, walls, dividers, holes and labels of the weather sensor radiation shield model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model