Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Rocking kettle tipper cradle
By Krypto
Complexity
Simple
Others Accessibility & daily living
0
Rocking kettle tipper cradle
MAIN PURPOSE: Pour a full kettle without lifting it
Stand a cordless kettle on the platform against the back rest and push its top: the cradle rolls forward on the curved rocker and pours into the cup in front, then rocks back on its own when you let go. Nobody has to lift a full, hot kettle.
Printing notes
467.5 cm³
Volume
579.7 g
Est. weight
800
Triangles

Print as it comes (profile on the bed) in PETG, 30% infill.

AR view Open in app
Preview of One-handed nail clipper press board
By Krypto
Complexity
Simple
Others Accessibility & daily living
0
One-handed nail clipper press board
MAIN PURPOSE: Cut fingernails with one hand
Drop a standard clipper into the channel with its jaws over the front notch: slip a fingertip under the jaws and press the lever with your palm or wrist. The grip feet keep the board still, so nails can be cut with one working hand.
Printing notes
32.0 cm³
Volume
39.7 g
Est. weight
1,100
Triangles

Fix the clipper with a dab of putty adhesive. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Drawer photo label frame
By Krypto
Complexity
Simple
Others Accessibility & daily living
0
Drawer photo label frame
MAIN PURPOSE: Show drawer contents with a picture
Slide a photo of what is inside into the grooved frame and stick it on the drawer front: a picture of socks or cutlery is easier to read than a word, so people living with dementia find things themselves. Takes credit-card size prints.
Printing notes
10.0 cm³
Volume
12.4 g
Est. weight
504
Triangles

Fix with two small screws or a strip of foam tape. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Key turner grip
By Krypto
Complexity
Simple
Others Accessibility & daily living
0
Key turner grip
MAIN PURPOSE: Turn keys with less effort
A big paddle that makes a small key easy to turn for anyone with arthritis or a weak grip: glue the key head into the recess with epoxy, its blade sticking out through the end slot.
Printing notes
24.9 cm³
Volume
30.8 g
Est. weight
4,244
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Universal wide grip
By Krypto
Complexity
Medium
Others Accessibility & daily living
0
Universal wide grip
MAIN PURPOSE: Make thin handles easier to hold
Thickens the handle of a pen, a fork or a toothbrush for an easier grip: push the handle through the hole and pad it with tape to fit; the ribbed sides stop it twisting in the hand.
Printing notes
3.4 cm³
Volume
4.2 g
Est. weight
7,320
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Large zipper pull
By Krypto
Complexity
Simple
Others Accessibility & daily living
0
Large zipper pull
MAIN PURPOSE: Make zips easier to use
A big tab that clips onto a small zip with a split ring, so coats and bags can be zipped up with cold fingers, gloves or a weak grip.
Printing notes
1.5 cm³
Volume
1.9 g
Est. weight
1,480
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Twist-cap bottle opener
By Krypto
Complexity
Simple
Others Accessibility & daily living
0
Twist-cap bottle opener
MAIN PURPOSE: Open tight bottle caps with less effort
Opens tight plastic bottle caps for anyone with a weak grip: push the tapered jaw over the cap until it wedges, then turn the long handle.
Printing notes
22.1 cm³
Volume
27.4 g
Est. weight
184
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Can tab lifter
By Krypto
Complexity
Simple
Others Accessibility & daily living
0
Can tab lifter
MAIN PURPOSE: Open ring-pull cans without hurting fingers
A keyring tool that lifts stiff ring-pull tabs on drinks cans and tins without breaking a nail: slip the hooked tip under the tab and lever up.
Printing notes
2.5 cm³
Volume
3.1 g
Est. weight
268
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Diabetes kit case
By Krypto
Complexity
Multi-part assembly
Others Accessibility & daily living
0
Diabetes kit case
MAIN PURPOSE: Carry blood glucose testing supplies
Carries a blood glucose meter, test strips, lancing device, lancets and a spare insulin pen needle box in one slim case, with a telescoping lid.
Printing notes
136.1 cm³
Volume
168.8 g
Est. weight
5,040
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Auto-injector carry case
By Krypto
Complexity
Multi-part assembly
Others Accessibility & daily living
0
Auto-injector carry case
MAIN PURPOSE: Carry emergency auto-injectors safely
A rigid case for two adrenaline auto-injector pens, so they are never crushed in a bag; the bright lid text tells anyone what is inside.
Printing notes
105.2 cm³
Volume
130.4 g
Est. weight
11,256
Triangles

Print the lid in a bright colour. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan