Models Showcase: free 3D-printable organizers

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Geometric & decorative

0

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in rounded, upright reeds that are deepest at the belly and fade away up the neck. About 110 mm across the reeds and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

247.5 cm³

Volume

306.8 g

Est. weight

562,116

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Kitchen Others Serving & table

0

Vaze Reeded Footed Bowl

MAIN PURPOSE: Serve fruit and snacks, or hold keys

A wide, shallow bowl wrapped in rounded, upright reeds that swell out at the middle, standing on three slim splayed legs. About 170 mm across the reeds with a low 25 mm bowl, it's ideal for fruit, snacks, keys or a candle on a table or shelf.
The legs print separately and press into holes under the bowl, so every part prints flat with no supports. Change the size or the reed depth in the editor to make your own.

Printing notes

139.5 cm³

Volume

173.0 g

Est. weight

72,364

Triangles

Print the three legs separately and press them into the holes underneath; a drop of glue makes them permanent. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Geometric & decorative

0

Vaze Reeded Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly and a narrow neck, wrapped in rounded, upright reeds. The reeds are deepest at the belly and thin out towards the neck, like a classic ribbed glass bottle. About 110 mm across the reeds and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

244.9 cm³

Volume

303.7 g

Est. weight

37,780

Triangles

Translucent or silk PLA shows off the reeds. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Others Geometric & decorative

0

Vaze Tall Reeded

MAIN PURPOSE: Hold dried flowers, pens or brushes

A tall, slim vase wrapped in rounded, upright reeds that swell gently through the middle, like a ribbed glass vase. 150 mm tall and about 80 mm across the reeds, so it suits a single stem, dried flowers or grasses, or pens, brushes and kitchen utensils.
Prints in one piece with no supports. Change the height, the diameter or the reed depth in the editor to make your own.

Printing notes

232.2 cm³

Volume

288.0 g

Est. weight

42,176

Triangles

Translucent PETG gives a ribbed-glass look and holds water for fresh flowers; in PLA, stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Reeded Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish wrapped in rounded, upright reeds like ribbed glass, swelling out at the middle like a spun bowl. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size or the reed depth in the editor to make your own.

Printing notes

91.8 cm³

Volume

113.8 g

Est. weight

29,324

Triangles

Translucent or glossy PLA makes it look like reeded glass; 3 walls keep the reeds solid. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Geometric & decorative

0

Vaze Fluted Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in straight, upright flutes that are deepest at the belly and fade away up the neck. About 110 mm across the flutes and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

172.9 cm³

Volume

214.4 g

Est. weight

562,116

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Kitchen Others Serving & table

0

Vaze Fluted Footed Bowl

MAIN PURPOSE: Serve fruit and snacks, or hold keys

A wide, shallow bowl wrapped in straight, upright flutes that swell out at the middle, standing on three slim splayed legs. About 170 mm across the flutes with a low 25 mm bowl, it's ideal for fruit, snacks, keys or a candle on a table or shelf.
The legs print separately and press into holes under the bowl, so every part prints flat with no supports. Change the size or the flute depth in the editor to make your own.

Printing notes

113.3 cm³

Volume

140.5 g

Est. weight

72,364

Triangles

Print the three legs separately and press them into the holes underneath; a drop of glue makes them permanent. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Geometric & decorative

0

Vaze Fluted Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly and a narrow neck, wrapped in straight, upright flutes. The flutes are deepest at the belly and thin out towards the neck, like a classic fluted bottle. About 110 mm across the flutes and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

172.6 cm³

Volume

214.0 g

Est. weight

37,780

Triangles

Silk or marble PLA shows off the flutes. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Others Geometric & decorative

0

Vaze Tall Fluted

MAIN PURPOSE: Hold dried flowers, pens or brushes

A tall, slim vase wrapped in straight, upright flutes that swell gently through the middle, like a classical column. 150 mm tall and about 80 mm across the flutes, so it suits a single stem, dried flowers or grasses, or pens, brushes and kitchen utensils.
Prints in one piece with no supports. Change the height, the diameter or the flute depth in the editor to make your own.

Printing notes

166.7 cm³

Volume

206.7 g

Est. weight

42,176

Triangles

Use 3 walls so the flutes print solid. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Fluted Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish wrapped in straight, upright flutes like a classical column, swelling out at the middle like a spun bowl. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size or the flute depth in the editor to make your own.

Printing notes

69.7 cm³

Volume

86.4 g

Est. weight

29,324

Triangles

Marble or stone-effect PLA gives it a classical look; 3 walls keep the flutes solid. Prints as shown on its floor, no supports.

AR view Open in app