Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Solder spool dispenser
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Solder spool dispenser
MAIN PURPOSE: Feed solder wire from its spool
A round canister the solder spool turns inside, feeding the wire out through a small hole in the fitted top, on round feet.
Printing notes
63.1 cm³
Volume
78.3 g
Est. weight
1,720
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Wall spray bottle caddy
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Wall spray bottle caddy
MAIN PURPOSE: Hang spray bottles trigger-ready on the wall
Three bays for spray bottles with a low front so the triggers are easy to grab, mounted with keyholes.
Printing notes
141.2 cm³
Volume
175.1 g
Est. weight
1,520
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Car wash bucket grit guard
By Krypto
Complexity
Medium
Workshop Car & bike
0
Car wash bucket grit guard
MAIN PURPOSE: Trap grit below your wash mitt
A honeycomb-perforated disc on feet that sits in the bottom of a wash bucket and keeps grit away from your mitt.
Printing notes
180.4 cm³
Volume
223.7 g
Est. weight
5,516
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Heat-shrink tubing graduated lanes
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Heat-shrink tubing graduated lanes
MAIN PURPOSE: Sort heat-shrink tubing by diameter
Six lanes that get wider from left to right, for heat-shrink tubing from the thinnest to the thickest, with a label slot.
Printing notes
98.2 cm³
Volume
121.7 g
Est. weight
1,124
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Parts washing basket
By Krypto
Complexity
Medium
Workshop Tools & jigs
0
Parts washing basket
MAIN PURPOSE: Dunk small parts in cleaner
A basket with honeycomb perforations in the floor and walls and handle slots, for dunking small parts in cleaner.
Printing notes
66.6 cm³
Volume
82.6 g
Est. weight
18,228
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Blade disposal bank
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Blade disposal bank
MAIN PURPOSE: Safely dispose of used blades
A sealed bank for used craft and utility blades: they go in through the slot in the top and never come back out.
Printing notes
30.7 cm³
Volume
38.0 g
Est. weight
6,876
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Desktop pegboard tool stand
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Desktop pegboard tool stand
MAIN PURPOSE: Hang tools on a freestanding pegboard
A freestanding back panel perforated with round holes for pegboard hooks, on a base plate.
Printing notes
209.5 cm³
Volume
259.8 g
Est. weight
15,448
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bench cookie riser
By Krypto
Complexity
Medium (set)
Workshop Woodworking
0
Bench cookie riser
MAIN PURPOSE: Lift work off the bench
A ribbed riser that lifts work off the bench for routing, sanding and painting, with a honeycomb grip on top; print a set of four. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
31.7 cm³
Volume
39.3 g
Est. weight
5,704
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Corner clamping square
By Krypto
Complexity
Medium
Workshop Woodworking
0
Corner clamping square
MAIN PURPOSE: Clamp box corners at ninety degrees
A rigid 90-degree square for gluing up boxes and frames, with a relief notch in the corner for glue squeeze-out and slots for the clamp jaws.
Printing notes
46.8 cm³
Volume
58.1 g
Est. weight
1,564
Triangles

Prints as shown on its outline, no supports.

AR view Open in app
Preview of Shelf pin drilling jig
By Krypto
Complexity
Medium
Workshop Tools & jigs
0
Shelf pin drilling jig
MAIN PURPOSE: Drill evenly spaced shelf-pin holes
Hook the lip over the front edge of a cabinet side and drill a perfectly even row of 5 mm shelf-pin holes on a 32 mm grid, 37 mm in from the edge. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
34.5 cm³
Volume
42.7 g
Est. weight
1,196
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan