Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Wet boot drip tray
By Krypto
Complexity
Medium
Others Wardrobe & dressing
0
Wet boot drip tray
MAIN PURPOSE: Catch meltwater under wet boots
A boot tray for one pair of wet or muddy boots: four low ribs hold the soles above the meltwater and grit, and the raised rim keeps it off the floor.
Printing notes
171.0 cm³
Volume
212.0 g
Est. weight
2,940
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Squeeze bottle upside-down stand
By Krypto
Complexity
Medium
Kitchen Kitchen organisers
0
Squeeze bottle upside-down stand
MAIN PURPOSE: Stand sauce bottles upside down
Three bottles stand cap-down in the top plate, so ketchup and sauces are always at the nozzle.
Printing notes
86.8 cm³
Volume
107.6 g
Est. weight
2,820
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Spaghetti portion gauge
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Spaghetti portion gauge
MAIN PURPOSE: Measure dry spaghetti by portion
A flat gauge with four holes that measure dry spaghetti for one to four servings, numbered underneath each hole.
Printing notes
40.6 cm³
Volume
50.4 g
Est. weight
4,348
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Twin-chamber nut and shell bowl
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Twin-chamber nut and shell bowl
MAIN PURPOSE: Serve nuts with a shell bowl
Two round bowls fused side by side at different heights: nuts in the big one, shells in the small one.
Printing notes
164.1 cm³
Volume
203.5 g
Est. weight
1,360
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bag-filling stand with wave walls
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Bag-filling stand with wave walls
MAIN PURPOSE: Hold freezer bags open for filling
Fold a freezer bag over the rim and it stays open for filling, with a wave texture all round and raised feet.
Printing notes
39.3 cm³
Volume
48.7 g
Est. weight
5,936
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Freezer bag file box
By Krypto
Complexity
Medium
Kitchen Food storage
0
Freezer bag file box
MAIN PURPOSE: File flat-frozen bags upright
Files flat-frozen bags upright like folders in four lanes, with a label slot and rounded rims.
Printing notes
349.2 cm³
Volume
433.0 g
Est. weight
2,988
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Berry rinsing colander
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Berry rinsing colander
MAIN PURPOSE: Rinse berries and cherry tomatoes
A round colander with a perforated floor on raised feet, for rinsing berries and cherry tomatoes.
Printing notes
151.2 cm³
Volume
187.4 g
Est. weight
18,264
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Six-bottle beer caddy with handle
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Six-bottle beer caddy with handle
MAIN PURPOSE: Carry six beer bottles together
Six bottle bays with low outer walls and a tall middle wall with a hand hole for carrying.
Printing notes
88.7 cm³
Volume
109.9 g
Est. weight
1,680
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Baking twine dispenser
By Krypto
Complexity
Medium
Kitchen Baking & sweets
0
Baking twine dispenser
MAIN PURPOSE: Dispense baking twine from a cone
A hexagon canister for a cone of baking twine, with a small hole in the fitted top to pull it through.
Printing notes
85.8 cm³
Volume
106.4 g
Est. weight
304
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Mesh food cover
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Mesh food cover
MAIN PURPOSE: Keep insects off outdoor food
A cover with honeycomb mesh walls that keeps insects off food outdoors. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
121.7 cm³
Volume
150.9 g
Est. weight
13,424
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan