Showcase
Models Showcase
Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category
MAIN PURPOSE: Hang tools on a freestanding pegboard
A freestanding back panel perforated with round holes for pegboard hooks, on a base plate.
Printing notes
209.5 cm³
Volume
259.8 g
Est. weight
15,448
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Lift work off the bench
A ribbed riser that lifts work off the bench for routing, sanding and painting, with a honeycomb grip on top; print a set of four. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
31.7 cm³
Volume
39.3 g
Est. weight
5,704
Triangles
Print floor-down as shown, then turn it over to use it.
MAIN PURPOSE: Clamp box corners at ninety degrees
A rigid 90-degree square for gluing up boxes and frames, with a relief notch in the corner for glue squeeze-out and slots for the clamp jaws.
Printing notes
46.8 cm³
Volume
58.1 g
Est. weight
1,564
Triangles
Prints as shown on its outline, no supports.
MAIN PURPOSE: Drill evenly spaced shelf-pin holes
Hook the lip over the front edge of a cabinet side and drill a perfectly even row of 5 mm shelf-pin holes on a 32 mm grid, 37 mm in from the edge. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
34.5 cm³
Volume
42.7 g
Est. weight
1,196
Triangles
Print floor-down as shown, then turn it over to use it.
MAIN PURPOSE: Sort three screwdrivers in lanes
A 3x1 Gridfinity tray with three screwdriver lanes.
Printing notes
35.2 cm³
Volume
43.7 g
Est. weight
2,108
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Sort small parts in six cells
A 2x3 Gridfinity sorter with six cells.
Printing notes
73.9 cm³
Volume
91.7 g
Est. weight
2,780
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Sort bits in a split bin
A 1x2 Gridfinity bin split in two for bits.
Printing notes
23.9 cm³
Volume
29.7 g
Est. weight
1,876
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Hold long items in three lanes
A deep 3x2 Gridfinity bin with three lanes.
Printing notes
76.2 cm³
Volume
94.5 g
Est. weight
2,768
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Carry brushes, rollers and paint trays
Three bays for brushes, rollers and trays with carry notches.
Printing notes
144.5 cm³
Volume
179.2 g
Est. weight
284
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Park a drill and driver together
Two bays for a drill and a driver with a cable hole at the back.
Printing notes
103.6 cm³
Volume
128.5 g
Est. weight
788
Triangles
Prints as shown on its floor, no supports.