Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Vaze Basket Gourd Vase
By Alpha
Complexity
Medium (set)
Bedroom & bathroom Others Geometric & decorative
0
Vaze Basket Gourd Vase
MAIN PURPOSE: Display a single stem or dried flowers
A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped all over in a woven basket pattern like a wicker-covered demijohn. About 90 mm across and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.
Printing notes
90.5 cm³
Volume
112.2 g
Est. weight
398,212
Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. Wood-fill PLA gives a natural wicker look. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Basket Footed Bowl
By Alpha
Complexity
Medium
Kitchen Others Serving & table
0
Vaze Basket Footed Bowl
MAIN PURPOSE: Serve fruit and snacks, or hold keys
A wide, shallow bowl wrapped in a woven basket pattern, standing on three slim splayed legs, like a little wicker fruit bowl. About 150 mm across with a low 25 mm bowl, it's ideal for fruit, snacks, keys or a candle on a table or shelf.
The legs print separately and press into holes under the bowl, so every part prints flat with no supports. Change the size or the weave size in the editor to make your own.
Printing notes
83.8 cm³
Volume
104.0 g
Est. weight
28,508
Triangles

Print the three legs separately and press them into the holes underneath; a drop of glue makes them permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Basket Bottle
By Alpha
Complexity
Medium
Bedroom & bathroom Others Geometric & decorative
0
Vaze Basket Bottle
MAIN PURPOSE: Display dried flowers or a single stem
A small bottle vase with a round belly, a narrower neck and a gently flared lip, wrapped in a woven basket pattern like a wicker-covered bottle. About 105 mm across and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.
Printing notes
105.6 cm³
Volume
130.9 g
Est. weight
303,780
Triangles

Wood-fill or matte tan PLA makes the weave look like real rattan. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Tall Basket
By Alpha
Complexity
Medium
Desk & office Others Geometric & decorative
0
Vaze Tall Basket
MAIN PURPOSE: Hold dried flowers, pens or brushes
A tall, slim vase that swells gently through the middle, wrapped all over in a woven basket pattern like a wicker sleeve. 150 mm tall and about 75 mm across, so it suits a single stem, dried flowers or grasses, or pens, brushes and kitchen utensils.
Prints in one piece with no supports. Change the height, the diameter or the curve in the editor to make your own.
Printing notes
104.1 cm³
Volume
129.0 g
Est. weight
331,300
Triangles

Wood-fill or matte PLA gives a natural wicker look. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Basket Dish
By Alpha
Complexity
Medium
Desk & office Bedroom & bathroom Others Geometric & decorative
0
Vaze Basket Dish
MAIN PURPOSE: Catch keys, rings and small trinkets
A low dish that swells out at the middle like a spun bowl, wrapped in a woven basket pattern that looks like rattan or wicker. About 115 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size, the curve or the weave size in the editor to make your own.
Printing notes
46.6 cm³
Volume
57.8 g
Est. weight
92,836
Triangles

Wood-fill or matte tan PLA makes it look like real woven rattan. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Knurl Gourd Vase
By Alpha
Complexity
Medium (set)
Bedroom & bathroom Others Geometric & decorative
1
Vaze Knurl Gourd Vase
MAIN PURPOSE: Display a single stem or dried flowers
A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, covered all over in a crisp diamond knurl. About 95 mm across and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.
Printing notes
97.9 cm³
Volume
121.5 g
Est. weight
518,884
Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Knurl Footed Bowl
By Alpha
Complexity
Medium
Kitchen Others Serving & table
0
Vaze Knurl Footed Bowl
MAIN PURPOSE: Serve fruit and snacks, or hold keys
A wide, shallow bowl wrapped in a crisp diamond knurl, standing on three slim splayed legs. About 155 mm across with a low 25 mm bowl, it's ideal for fruit, snacks, keys or a candle on a table or shelf.
The legs print separately and press into holes under the bowl, so every part prints flat with no supports. Change the size or the diamond size in the editor to make your own.
Printing notes
86.1 cm³
Volume
106.7 g
Est. weight
40,028
Triangles

Print the three legs separately and press them into the holes underneath; a drop of glue makes them permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Knurl Bottle
By Alpha
Complexity
Medium
Bedroom & bathroom Others Geometric & decorative
0
Vaze Knurl Bottle
MAIN PURPOSE: Display dried flowers or a single stem
A small bottle vase with a round belly, a narrower neck and a gently flared lip, covered in a crisp diamond knurl. About 110 mm across and 100 mm tall, it reads like a classic cut-glass bottle.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.
Printing notes
112.8 cm³
Volume
139.9 g
Est. weight
430,500
Triangles

Silk or dual-colour PLA makes the diamonds sparkle. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Tall Knurl
By Alpha
Complexity
Medium
Desk & office Others Geometric & decorative
0
Vaze Tall Knurl
MAIN PURPOSE: Hold dried flowers, pens or brushes
A tall, slim vase that swells gently through the middle, covered all over in a diamond knurl like a cut-glass grip. 150 mm tall and about 80 mm across, so it suits a single stem, dried flowers or grasses, or pens, brushes and kitchen utensils.
Prints in one piece with no supports. Change the height, the diameter or the curve in the editor to make your own.
Printing notes
112.2 cm³
Volume
139.2 g
Est. weight
438,964
Triangles

Use 3 walls so the diamonds print solid. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Knurl Dish
By Alpha
Complexity
Medium
Desk & office Bedroom & bathroom Others Geometric & decorative
0
Vaze Knurl Dish
MAIN PURPOSE: Catch keys, rings and small trinkets
A low dish that swells out at the middle like a spun bowl, covered in a crisp diamond knurl that catches the light from every side. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size, the curve or the diamond size in the editor to make your own.
Printing notes
48.8 cm³
Volume
60.5 g
Est. weight
132,004
Triangles

Silk or matte PLA both show the diamonds well. 3 walls keep the knurl solid. Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan