Models Showcase: free 3D-printable organizers

By Alpha

Complexity

Medium

Desk & office Others Geometric & decorative

0

MAIN PURPOSE: Hold dried flowers, pens or brushes

A tall, slim vase that swells gently through the middle, wrapped all over in a woven basket pattern like a wicker sleeve. 150 mm tall and about 75 mm across, so it suits a single stem, dried flowers or grasses, or pens, brushes and kitchen utensils.
Prints in one piece with no supports. Change the height, the diameter or the curve in the editor to make your own.

Printing notes

104.1 cm³

Volume

129.0 g

Est. weight

331,300

Triangles

Wood-fill or matte PLA gives a natural wicker look. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Basket Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish that swells out at the middle like a spun bowl, wrapped in a woven basket pattern that looks like rattan or wicker. About 115 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size, the curve or the weave size in the editor to make your own.

Printing notes

46.6 cm³

Volume

57.8 g

Est. weight

92,836

Triangles

Wood-fill or matte tan PLA makes it look like real woven rattan. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Geometric & decorative

1

Vaze Knurl Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, covered all over in a crisp diamond knurl. About 95 mm across and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

97.9 cm³

Volume

121.5 g

Est. weight

518,884

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Geometric & decorative

0

Vaze Knurl Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly, a narrower neck and a gently flared lip, covered in a crisp diamond knurl. About 110 mm across and 100 mm tall, it reads like a classic cut-glass bottle.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

112.8 cm³

Volume

139.9 g

Est. weight

430,500

Triangles

Silk or dual-colour PLA makes the diamonds sparkle. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Others Geometric & decorative

0

Vaze Tall Knurl

MAIN PURPOSE: Hold dried flowers, pens or brushes

A tall, slim vase that swells gently through the middle, covered all over in a diamond knurl like a cut-glass grip. 150 mm tall and about 80 mm across, so it suits a single stem, dried flowers or grasses, or pens, brushes and kitchen utensils.
Prints in one piece with no supports. Change the height, the diameter or the curve in the editor to make your own.

Printing notes

112.2 cm³

Volume

139.2 g

Est. weight

438,964

Triangles

Use 3 walls so the diamonds print solid. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Knurl Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish that swells out at the middle like a spun bowl, covered in a crisp diamond knurl that catches the light from every side. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size, the curve or the diamond size in the editor to make your own.

Printing notes

48.8 cm³

Volume

60.5 g

Est. weight

132,004

Triangles

Silk or matte PLA both show the diamonds well. 3 walls keep the knurl solid. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Geometric & decorative

1

Vaze Swirl Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in sharp pleats that twist 45° around it. The pleats are deepest at the belly and fade away up the neck, so the swirl looks like it's spinning upward. About 110 mm across the pleats and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

181.9 cm³

Volume

225.5 g

Est. weight

105,380

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. Silk or dual-colour PLA makes the twist stand out. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Geometric & decorative

1

Vaze Swirl Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly and a narrow neck, wrapped in sharp pleats that twist 45° around it. The pleats are deepest at the belly and thin out towards the neck, so it reads like a classic bottle with a swirl. About 110 mm across the pleats and 100 mm tall.

Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

181.2 cm³

Volume

224.7 g

Est. weight

21,080

Triangles

Silk or dual-colour PLA makes the twist stand out. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Others Geometric & decorative

0

Vaze Tall Swirl

MAIN PURPOSE: Hold dried flowers, pens or brushes

A tall, slim vase wrapped in sharp pleats that twist 45° around it and swell gently through the middle. 150 mm tall with a 60 mm body (about 80 mm across the pleats), so it suits a single stem, dried flowers or grasses, or pens, brushes and kitchen utensils.

Prints in one piece with no supports. Change the height, the diameter, the pleat depth or the twist in the editor to make your own.

Printing notes

174.5 cm³

Volume

216.4 g

Est. weight

23,784

Triangles

Use 3 walls so the pleats print solid. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Swirl Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish wrapped in sharp pleats that twist 45° around it, swelling out at the middle like a spun bowl. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.

Prints in one piece with no supports. Change the size, the pleat depth or the twist in the editor to make your own.

Printing notes

53.7 cm³

Volume

66.6 g

Est. weight

21,056

Triangles

Silk or dual-colour PLA makes the twist stand out; 3 walls keep the pleats solid. Prints as shown on its floor, no supports.

AR view Open in app