Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Oval three-tier screw-together stand
By Krypto
Complexity
Advanced
Kitchen Serving & table
0
Oval three-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on three oval tiers that screw together
A tiered stand of three long oval trays, handy for biscuits and fruit, 150, 130 and 110 mm across, each held 30 mm above the one below on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
141.4 cm³
Volume
175.3 g
Est. weight
11,960
Triangles

Every part prints flat with no supports. Screw each column onto the stud in the tray below, screw the next tray on top, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Flower three-tier screw-together stand
By Krypto
Complexity
Advanced
Kitchen Serving & table
0
Flower three-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on three flower tiers that screw together
A tiered stand of three flower-shaped trays with soft petal edges, 150, 130 and 110 mm across, each held 30 mm above the one below on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
168.0 cm³
Volume
208.3 g
Est. weight
13,364
Triangles

Every part prints flat with no supports. Screw each column onto the stud in the tray below, screw the next tray on top, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Heart three-tier screw-together stand
By Krypto
Complexity
Advanced
Kitchen Serving & table
0
Heart three-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on three heart tiers that screw together
A tiered stand of three heart-shaped trays, made for weddings, anniversaries and Valentine treats, 150, 130 and 110 mm across, each held 30 mm above the one below on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
173.1 cm³
Volume
214.7 g
Est. weight
11,516
Triangles

Every part prints flat with no supports. Screw each column onto the stud in the tray below, screw the next tray on top, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Star three-tier screw-together stand
By Krypto
Complexity
Advanced
Kitchen Serving & table
0
Star three-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on three star tiers that screw together
A tiered stand of three star-shaped trays for parties and festive sweets, 150, 130 and 110 mm across, each held 30 mm above the one below on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
141.9 cm³
Volume
176.0 g
Est. weight
10,268
Triangles

Every part prints flat with no supports. Screw each column onto the stud in the tray below, screw the next tray on top, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Half-moon two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Half-moon two-tier screw-together stand
MAIN PURPOSE: Serve on a round tray with a half-moon tray screwed above it
A two-tier stand: a 150 mm round tray on a short round pedestal with a full-width foot, and a 150 x 75 mm half-moon tray standing above it on a screw-in column, leaving the front half of the lower tray open to reach into. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
189.3 cm³
Volume
234.7 g
Est. weight
6,212
Triangles

Every part prints flat with no supports. Screw each column onto the stud in the tray below, screw the next tray on top, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Round three-tier screw-together stand
By Krypto
Complexity
Advanced
Kitchen Serving & table
0
Round three-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on three round tiers that screw together
A tiered cake-stand made from three round trays, 150, 130 and 110 mm across, each standing 30 mm above the one below on a slim screw-in column. The bottom tray sits on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
186.8 cm³
Volume
231.6 g
Est. weight
11,960
Triangles

Every part prints flat with no supports: three trays, two columns and the pedestal. Screw each column onto the stud in the tray below, screw the next tray on top, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Square three-tier screw-together stand
By Krypto
Complexity
Advanced
Kitchen Serving & table
0
Square three-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on three square tiers that screw together
The square version of the screw-together stand: three square trays, 150, 130 and 110 mm across with rounded corners, each held 30 mm above the one below on a square screw-in column, standing on a single square pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
165.2 cm³
Volume
204.8 g
Est. weight
11,496
Triangles

Every part prints flat with no supports: three trays, two columns and the pedestal. Screw each column onto the stud in the tray below, screw the next tray on top, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Swiss-cheese wedge knife tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Swiss-cheese wedge knife tray
MAIN PURPOSE: Rest cheese knives and picks in a cartoon cheese wedge
A cheese-course tray shaped like a cartoon wedge of Swiss cheese, holes bitten out of its edges. The cheese knives, forks and picks lie in the wedge between courses instead of on the tablecloth. It always gets a smile when the board comes out.
Printing notes
46.4 cm³
Volume
57.5 g
Est. weight
2,408
Triangles

Print in yellow PETG for the cheese board. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Spider-web party platter
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Spider-web party platter
MAIN PURPOSE: Serve Halloween snacks in a spider web
A Halloween platter laid out as a spider's web: eight spokes and a ring of silk split it into an outer ring of sixteen snack bays and an inner web, with a dip well at the centre where the spider would sit. Fill the bays with sweets, pretzel sticks and grapes and let the guests get tangled.
Printing notes
226.9 cm³
Volume
281.3 g
Est. weight
1,880
Triangles

Print in black or glow-in-the-dark filament; food-safe PETG for the food. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Watermelon-slice snack tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Watermelon-slice snack tray
MAIN PURPOSE: Serve summer snacks in a watermelon slice
A half-moon snack tray shaped like a slice of watermelon, with a raised inner wall as the rind running round the curve and three bays like the slices you would cut. It is made for barbecues and picnics; fill it with fruit, crisps and dips.
Printing notes
139.5 cm³
Volume
172.9 g
Est. weight
532
Triangles

Print the tray pink or red and add black-seed sweets; food-safe PETG. Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan