Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Octagon pedestal tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Octagon pedestal tray
MAIN PURPOSE: Raise a octagon tray on a single pedestal for display or serving
A 150 mm octagon tray lifted 45 mm off the table on a single round pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.
Printing notes
81.8 cm³
Volume
101.5 g
Est. weight
644
Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Oval two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Oval two-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on two oval tiers that screw together
A two-tier stand of oval trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
104.3 cm³
Volume
129.3 g
Est. weight
6,596
Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Oval pedestal tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Oval pedestal tray
MAIN PURPOSE: Raise a oval tray on a single pedestal for display or serving
A 150 mm oval tray lifted 45 mm off the table on a single round pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.
Printing notes
59.6 cm³
Volume
73.9 g
Est. weight
1,232
Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Flower two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Flower two-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on two flower tiers that screw together
A two-tier stand of flower-shaped trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
126.7 cm³
Volume
157.1 g
Est. weight
7,532
Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Flower pedestal tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Flower pedestal tray
MAIN PURPOSE: Raise a flower tray on a single pedestal for display or serving
A 150 mm flower-shaped tray lifted 45 mm off the table on a single round pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.
Printing notes
77.1 cm³
Volume
95.6 g
Est. weight
1,700
Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Heart two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Heart two-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on two heart tiers that screw together
A two-tier stand of heart-shaped trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
130.7 cm³
Volume
162.1 g
Est. weight
6,316
Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Heart pedestal tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Heart pedestal tray
MAIN PURPOSE: Raise a heart tray on a single pedestal for display or serving
A 150 mm heart-shaped tray lifted 45 mm off the table on a single round pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.
Printing notes
79.5 cm³
Volume
98.5 g
Est. weight
1,092
Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Star two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Star two-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on two star tiers that screw together
A two-tier stand of star-shaped trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
106.8 cm³
Volume
132.5 g
Est. weight
5,468
Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Star pedestal tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Star pedestal tray
MAIN PURPOSE: Raise a star tray on a single pedestal for display or serving
A 150 mm star-shaped tray lifted 45 mm off the table on a single round pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.
Printing notes
65.8 cm³
Volume
81.6 g
Est. weight
668
Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Triangle two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Triangle two-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on two triangle tiers that screw together
A two-tier stand of triangular trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
120.1 cm³
Volume
148.9 g
Est. weight
5,300
Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan