Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Basket-weave roll and fruit server
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Basket-weave roll and fruit server
MAIN PURPOSE: Serve rolls and fruit in a woven-look basket
An oval basket with a woven look all round, for rolls, bread and fruit on the table.
Printing notes
243.3 cm³
Volume
301.7 g
Est. weight
36,680
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Pedestal pie-slice snack server
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Pedestal pie-slice snack server
MAIN PURPOSE: Serve six snacks or dips in wedges
A round server divided into six slices by radial walls, on a short flared pedestal. Six snacks or dips, one in each wedge.
Printing notes
334.6 cm³
Volume
414.8 g
Est. weight
4,164
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Basket-weave picnic caddy with bar handle
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Basket-weave picnic caddy with bar handle
MAIN PURPOSE: Carry cutlery, napkins and cups to the table in one go
A woven-look caddy with two dividers and a straight bar handle in the middle. Cutlery in one bay, napkins in the next, cups or sauce pots in the third, all carried in one hand to the picnic table.
Printing notes
280.4 cm³
Volume
347.7 g
Est. weight
106,772
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Venn diagram snack bowl
By Krypto
Complexity
Advanced
Kitchen Serving & table
0
Venn diagram snack bowl
MAIN PURPOSE: Serve three snacks in overlapping circles whose overlaps hold the mixes
Three round bowls overlap like a Venn diagram, and the crossing walls split them into seven bays: one for each snack on its own, three lens-shaped bays where two of them meet, and a little triangle in the middle where all three meet. SWEET, SALTY and SPICY are engraved in the floors. Fill the overlaps with the mixes (chocolate pretzels, chilli chocolate, spicy crisps) and let the table argue about what belongs where. Relabel it for any three things you like.
Printing notes
197.7 cm³
Volume
245.1 g
Est. weight
11,236
Triangles

Food-safe PETG. Print it as one piece; the walls where the circles cross make all seven bays. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Conveyor-belt sushi party tray
By Krypto
Complexity
Medium (set)
Kitchen Serving & table
0
Conveyor-belt sushi party tray
MAIN PURPOSE: Slide little sushi plates round an oval track like a conveyor-belt bar
Kaiten-zushi at home. A 44 mm track runs right round an oval tray, past a central island for the soy sauce, wasabi and ginger. Load little plates of sushi onto the track, and the guests push the train round, taking what they like as it passes, just as in a conveyor-belt sushi bar. It works for tapas, dim sum and dessert bites too.
Printing notes
114.5 cm³
Volume
142.0 g
Est. weight
1,060
Triangles

Food-safe PETG. Print a set of small 40 mm plates in two or three colours to go round the track. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Round two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Round two-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on two round tiers that screw together
A two-tier stand of round trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
141.4 cm³
Volume
175.4 g
Est. weight
6,596
Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Round pedestal tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Round pedestal tray
MAIN PURPOSE: Raise a round tray on a single pedestal for display or serving
A 150 mm round tray lifted 45 mm off the table on a single round pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.
Printing notes
85.8 cm³
Volume
106.3 g
Est. weight
1,232
Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Square two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Square two-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on two square tiers that screw together
A two-tier stand of square, round-cornered trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single square pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
128.6 cm³
Volume
159.5 g
Est. weight
6,436
Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Square pedestal tray
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Square pedestal tray
MAIN PURPOSE: Raise a square tray on a single pedestal for display or serving
A 150 mm square, round-cornered tray lifted 45 mm off the table on a single square pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.
Printing notes
82.9 cm³
Volume
102.8 g
Est. weight
1,376
Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Hexagon two-tier screw-together stand
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Hexagon two-tier screw-together stand
MAIN PURPOSE: Serve sweets, fruit or trinkets on two hexagon tiers that screw together
A two-tier stand of hexagon trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.
Printing notes
129.1 cm³
Volume
160.1 g
Est. weight
5,372
Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan