Models Showcase: free 3D-printable organizers

By Alpha

Complexity

Medium (set)

0

Vaze Ringed Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped all over in stacked rings like a coiled clay vessel. About 95 mm across and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

121.9 cm³

Volume

151.2 g

Est. weight

319,774

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. Matte terracotta PLA gives a pottery look. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Vases

0

Vaze Ringed Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly, a narrower neck and a gently flared lip, wrapped in stacked rings like a hand-coiled clay pot. About 110 mm across and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

138.2 cm³

Volume

171.3 g

Est. weight

246,266

Triangles

Matte terracotta or stone-effect PLA makes it look like real pottery. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Vases

0

Vaze Spiral Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in smooth, rounded flutes that spiral 45° around it. The flutes are deepest at the belly and fade away up the neck. About 110 mm across the flutes and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

247.9 cm³

Volume

307.4 g

Est. weight

190,500

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Vases

0

Vaze Spiral Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly and a narrow neck, wrapped in smooth, rounded flutes that spiral 45° around it. The flutes are deepest at the belly and thin out towards the neck, like a classic bottle given a soft twist. About 110 mm across the flutes and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

245.5 cm³

Volume

304.4 g

Est. weight

72,080

Triangles

Silk or dual-colour PLA makes the spiral stand out. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Vases

0

Vaze Basket Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped all over in a woven basket pattern like a wicker-covered demijohn. About 90 mm across and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

90.5 cm³

Volume

112.2 g

Est. weight

398,212

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. Wood-fill PLA gives a natural wicker look. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Vases

0

Vaze Basket Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly, a narrower neck and a gently flared lip, wrapped in a woven basket pattern like a wicker-covered bottle. About 105 mm across and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

105.6 cm³

Volume

130.9 g

Est. weight

303,780

Triangles

Wood-fill or matte tan PLA makes the weave look like real rattan. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Vases

1

Vaze Knurl Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, covered all over in a crisp diamond knurl. About 95 mm across and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

97.9 cm³

Volume

121.5 g

Est. weight

518,884

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Vases

0

Vaze Knurl Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly, a narrower neck and a gently flared lip, covered in a crisp diamond knurl. About 110 mm across and 100 mm tall, it reads like a classic cut-glass bottle.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

112.8 cm³

Volume

139.9 g

Est. weight

430,500

Triangles

Silk or dual-colour PLA makes the diamonds sparkle. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Vases

1

Vaze Swirl Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in sharp pleats that twist 45° around it. The pleats are deepest at the belly and fade away up the neck, so the swirl looks like it's spinning upward. About 110 mm across the pleats and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

181.9 cm³

Volume

225.5 g

Est. weight

105,380

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. Silk or dual-colour PLA makes the twist stand out. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Vases

1

Vaze Swirl Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly and a narrow neck, wrapped in sharp pleats that twist 45° around it. The pleats are deepest at the belly and thin out towards the neck, so it reads like a classic bottle with a swirl. About 110 mm across the pleats and 100 mm tall.

Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

181.2 cm³

Volume

224.7 g

Est. weight

21,080

Triangles

Silk or dual-colour PLA makes the twist stand out. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app