Models Showcase: free 3D-printable organizers

By Alpha

Complexity

Medium

0

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish that swells out at the middle like a spun bowl, covered in a low-poly skin of flat facets that catch the light like cut crystal. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size, the curve or the facet size in the editor to make your own.

Printing notes

57.2 cm³

Volume

70.9 g

Est. weight

23,212

Triangles

Silk or glossy PLA makes every facet flash in the light; 3 walls keep the facets solid. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Geometric & decorative

0

Vaze Reeded Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in rounded, upright reeds that are deepest at the belly and fade away up the neck. About 110 mm across the reeds and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

247.5 cm³

Volume

306.8 g

Est. weight

562,116

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Geometric & decorative

0

Vaze Reeded Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly and a narrow neck, wrapped in rounded, upright reeds. The reeds are deepest at the belly and thin out towards the neck, like a classic ribbed glass bottle. About 110 mm across the reeds and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

244.9 cm³

Volume

303.7 g

Est. weight

37,780

Triangles

Translucent or silk PLA shows off the reeds. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Reeded Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish wrapped in rounded, upright reeds like ribbed glass, swelling out at the middle like a spun bowl. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size or the reed depth in the editor to make your own.

Printing notes

91.8 cm³

Volume

113.8 g

Est. weight

29,324

Triangles

Translucent or glossy PLA makes it look like reeded glass; 3 walls keep the reeds solid. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Geometric & decorative

0

Vaze Fluted Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in straight, upright flutes that are deepest at the belly and fade away up the neck. About 110 mm across the flutes and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

172.9 cm³

Volume

214.4 g

Est. weight

562,116

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Geometric & decorative

0

Vaze Fluted Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly and a narrow neck, wrapped in straight, upright flutes. The flutes are deepest at the belly and thin out towards the neck, like a classic fluted bottle. About 110 mm across the flutes and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

172.6 cm³

Volume

214.0 g

Est. weight

37,780

Triangles

Silk or marble PLA shows off the flutes. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Fluted Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish wrapped in straight, upright flutes like a classical column, swelling out at the middle like a spun bowl. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size or the flute depth in the editor to make your own.

Printing notes

69.7 cm³

Volume

86.4 g

Est. weight

29,324

Triangles

Marble or stone-effect PLA gives it a classical look; 3 walls keep the flutes solid. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Geometric & decorative

0

Vaze Ringed Gourd Vase

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped all over in stacked rings like a coiled clay vessel. About 95 mm across and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

121.9 cm³

Volume

151.2 g

Est. weight

319,774

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. Matte terracotta PLA gives a pottery look. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Geometric & decorative

0

Vaze Ringed Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly, a narrower neck and a gently flared lip, wrapped in stacked rings like a hand-coiled clay pot. About 110 mm across and 100 mm tall.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

138.2 cm³

Volume

171.3 g

Est. weight

246,266

Triangles

Matte terracotta or stone-effect PLA makes it look like real pottery. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Ringed Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish that swells out at the middle like a spun bowl, wrapped in neat stacked rings like a turned pot on a potter's wheel. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size, the curve or the ring spacing in the editor to make your own.

Printing notes

57.8 cm³

Volume

71.6 g

Est. weight

79,298

Triangles

Matte or stone-effect PLA gives it a turned-ceramic look; 3 walls keep the rings solid. Prints as shown on its floor, no supports.

AR view Open in app