Sort post and cards into leaning slots
A deep tilted sorter with two dividers that holds letters and cards leaning toward you, on two legs behind. A chevron band runs along the front.
Prints as shown on its floor, no supports.
Filament: at most about 210 g of PLA printed solid (roughly $4.20 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).
The tilted mail and letter sorter with chevron front model measures 240 × 90 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 210 g of PLA (169 cm³ printed solid), roughly $4.20 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the tilted mail and letter sorter with chevron front model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.