Scan documents square with a phone
Lay the phone on the arm with its camera past the end: the lens sits 245 mm above the desk, square to the paper, so an A4 page fills the frame for a sharp, undistorted scan. Weigh the foot down with a book.
Print on its side as it comes; needs a 256 mm bed.
Filament: at most about 177 g of PLA printed solid (roughly $3.54 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The phone document scanning arm model measures 190 × 251 × 50 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print on its side as it comes; needs a 256 mm bed.
At most about 177 g of PLA (143 cm³ printed solid), roughly $3.54 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the phone document scanning arm model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.