Eumenes

Hold dip pen ink in a stable narrow-necked pot

An inkwell shaped like the nest of a potter wasp, the tiny clay pot with a narrow neck and flared lip that wasps build on twigs. The squat, heavy body will not tip, the narrow neck slows evaporation and the flared lip wipes the nib.

Customize this model

Size (Base A): Ø 74 mm, 32 mm tall
Shape: Round
Walls: 4.0 mm
Volume: 59.0 cm³
Est. weight (PLA): 73.1 g
Parts to print: 1
Category: Office tools
Made by: Krypto
Built in: 32 steps

What’s in it

Round, Ø 74 mm, 32 mm tall, with 4.0 mm walls
Raised grip base
3 holes in the floor
3 more bases built on (Bases B–D)
Base B: round, Ø 74 mm (stacked)
Base C: round, Ø 30 mm, 14 mm tall (stacked)
Base D: round, Ø 38 mm, 3 mm tall (stacked)

How to print it

PETG; seal inside with a coat of resin for permanent inks.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 73.1 g of PLA printed solid (roughly $1.46 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the eumenes model?

The eumenes model measures Ø 74 mm, 32 mm tall. That is Base A; 3 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG; seal inside with a coat of resin for permanent inks. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 73.1 g of PLA (59.0 cm³ printed solid), roughly $1.46 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.