Swatch Row

Display ink samples with their swatches

Stand seven ink sample vials in the row of holes and slip a written swatch card into the tall slot behind each one: the actual colour on paper sits next to its bottle, so choosing tomorrow’s ink no longer means opening every vial. The holes take 2 ml and 5 ml vials.

Customize this model

Size (Base A): 160 × 40 × 32 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 29.6 cm³
Est. weight (PLA): 36.7 g
Parts to print: 1
Category: Office tools
Made by: Krypto
Built in: 54 steps

What’s in it

Rectangular, 160 × 40 × 32 mm, with 2.4 mm walls
7 holes in the floor
Engraved text: “INK SAMPLES”
2 more bases built on (Bases B–C)
Base B: rectangular, 160 × 40 mm (stacked)
Base C: rectangular, 160 × 10 mm, 60 mm tall (beside)

How to print it

Print in PLA.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 36.7 g of PLA printed solid (roughly $0.73 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the swatch Row model?

The swatch Row model measures 160 × 40 × 32 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in PLA. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 36.7 g of PLA (29.6 cm³ printed solid), roughly $0.73 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.