Outpost Hab

Store small things in a two-deck colony habitat

A colony habitat box from a retro space age. A 120 mm module with three portholes and an airlock door carries a tall upper deck that lifts off, with a hatch you can drop things through, so it stores earbuds, cables or a tiny crew of figures. Print several and line them up as a base camp on the shelf.

Customize this model

Size: 120 × 70 × 34 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 82.2 cm³
Est. weight (PLA): 102 g
Parts to print: 2
Category: Collections & display
Made by: Krypto
Built in: 34 steps

What’s in it

Rectangular, 120 × 70 × 34 mm, with 2.4 mm walls
4 holes in the walls
Engraved text: “HAB 03”
Bin dome with an open front

How to print it

Print the upper deck in white and the module in grey.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Print the hood upside down, roof on the plate.

Filament: at most about 102 g of PLA printed solid (roughly $2.04 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the outpost Hab model?

The outpost Hab model measures 120 × 70 × 34 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Print the upper deck in white and the module in grey. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Print the hood upside down, roof on the plate.

How much filament does it use?

At most about 102 g of PLA (82.2 cm³ printed solid), roughly $2.04 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.