Tenement

Build a stackable miniature room at 1:24 scale

A 1:24 room box that stacks into a building. Each 120 mm room is open at the front, with a window in the back wall, a second window and a door in the side walls and scored floorboards, so you can furnish a flat, a shop or a studio. Stack rooms into a tower or set them side by side as a street.

Customize this model

Size: 120 × 90 × 80 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 46.9 cm³
Est. weight (PLA): 58.1 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 34 steps

What’s in it

Rectangular, 120 × 90 × 80 mm, with 2.4 mm walls
3 holes in the walls
1 patterned wall panel (engraved)

How to print it

Print as many rooms as storeys; a dab of museum putty locks the stack.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 58.1 g of PLA printed solid (roughly $1.16 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the tenement model?

The tenement model measures 120 × 90 × 80 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Print as many rooms as storeys; a dab of museum putty locks the stack. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 58.1 g of PLA (46.9 cm³ printed solid), roughly $1.16 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.