Farline

Mark the distance to someone in another city

A 150 mm column for two people in two cities. Each face is engraved up its height: the other city, the distance between you, its coordinates and a name. Print two, swap the city faces, and keep one on each desk so you both know exactly how far the other one is.

Customize this model

Size (Base A): 36 × 36 × 150 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 10.0 cm³
Est. weight (PLA): 12.3 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 48 steps

What’s in it

Rectangular, 36 × 36 × 150 mm, with 2.0 mm walls
Engraved and raised text: “LISBON”, “2,184 KM”, “38.72 N 9.14 W”, “FOR ANA”
3 more bases built on (Bases B–D)
Base B: rectangular, 36 × 36 mm (stacked)
Base C: rectangular, 24 × 24 mm, 10 mm tall (stacked)
Base D: rectangular, 24 × 24 mm (stacked)

How to print it

Print two, one for each city, in matching colours.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 12.3 g of PLA printed solid (roughly $0.25 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the farline model?

The farline model measures 36 × 36 × 150 mm (width × depth × height). That is Base A; 3 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print two, one for each city, in matching colours. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 12.3 g of PLA (10.0 cm³ printed solid), roughly $0.25 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.