Annals Stack

Record one milestone a year in stacking blocks

A totem that grows by one block a year. Each 64 mm block carries a big year on the front and the event of that year on the side, and two 10 x 3 mm magnets in the floor and lid snap the next block on top. Start it at a wedding, a first home or a birth and print a new block every anniversary.

Customize this model

Size (Base A): 64 × 64 × 40 mm
Shape: Square
Walls: 2.4 mm
Volume: 18.2 cm³
Est. weight (PLA): 22.6 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 39 steps

What’s in it

Square, 64 × 64 × 40 mm, with 2.4 mm walls
2 holes in the floor
Engraved and raised text: “2026”, “OUR FIRST HOME”, “ELM ROAD”
One more base built on (Base B)
Base B: square, 64 × 64 mm (stacked)

How to print it

One block per year, in a new colour each time. Glue in 10 x 3 mm magnets.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 22.6 g of PLA printed solid (roughly $0.45 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the annals Stack model?

The annals Stack model measures 64 × 64 × 40 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. One block per year, in a new colour each time. Glue in 10 x 3 mm magnets. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 22.6 g of PLA (18.2 cm³ printed solid), roughly $0.45 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.