Hookling

Perch an original sprite on a monitor or shelf edge

A small horned sprite that sits on the top edge of your monitor. Its round body perches on the bezel, two legs dangle over the screen and a long curled tail hangs down the back, with a 20 mm slot between them that grips the edge. The eyes are cut clean through, so it looks back at you lit by the screen glow.

Customize this model

Size: 64 × 122 × 10 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 18.5 cm³
Est. weight (PLA): 23.0 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 13 steps

What’s in it

Custom outline, 64 × 122 × 10 mm, with 5.0 mm walls
Custom outline traced from a shape
2 holes in the floor

How to print it

Print flat in a bright colour. Scale the width with the slot to fit thicker edges.

Filament: at most about 23.0 g of PLA printed solid (roughly $0.46 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the hookling model?

The hookling model measures 64 × 122 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat in a bright colour. Scale the width with the slot to fit thicker edges.

How much filament does it use?

At most about 23.0 g of PLA (18.5 cm³ printed solid), roughly $0.46 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.