Spinward

Spin a space-station tray for small treasures

A space station you can spin. A 140 mm wheel with a ring corridor, four spokes and a central hub sits on a lazy-Susan base, so it turns at a touch like a rotating station making its own gravity. Rings and earrings go in the corridor, keys and coins in the four sectors.

Customize this model

Size: Ø 140 mm, 23 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 191 cm³
Est. weight (PLA): 236 g
Parts to print: 2
Category: Collections & display
Made by: Krypto
Built in: 12 steps

What’s in it

Round, Ø 140 mm, 23 mm tall, with 2.4 mm walls
Lazy Susan turntable base (spins on 6 mm BBs)
Radial dividers making 4 wedge-shaped sections

How to print it

Print in silver grey; the spinning base needs 6 mm steel balls.

Prints as shown on its floor, no supports. The turntable ring prints separately and runs on 6 mm BBs.

Filament: at most about 236 g of PLA printed solid (roughly $4.73 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the spinward model?

The spinward model measures Ø 140 mm, 23 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in silver grey; the spinning base needs 6 mm steel balls. Prints as shown on its floor, no supports. The turntable ring prints separately and runs on 6 mm BBs.

How much filament does it use?

At most about 236 g of PLA (191 cm³ printed solid), roughly $4.73 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.