Cliffhouse

Display tiny treasures in six cave niches

A cliff dwelling for tiny treasures. Six cave windows of different sizes open into six separate niches, so rings, figures, shells and pebbles each get their own room in the rock. Print it face down and stand it on edge: load from the open back, look in from the front.

Customize this model

Size: 170 × 120 × 46 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 74.5 cm³
Est. weight (PLA): 92.4 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 61 steps

What’s in it

Rectangular, 170 × 120 × 46 mm, with 2.4 mm walls
3 dividers
6 holes in the floor

How to print it

Print face down in a sandstone tone; stand it on its long edge.

Prints as shown on its floor, no supports.

Filament: at most about 92.4 g of PLA printed solid (roughly $1.85 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the cliffhouse model?

The cliffhouse model measures 170 × 120 × 46 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print face down in a sandstone tone; stand it on its long edge. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 92.4 g of PLA (74.5 cm³ printed solid), roughly $1.85 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.