AR view

Stemline

Hang wine glasses under a shelf

Screw it under a kitchen shelf or wall cupboard and slide wine glasses in by their feet: they hang upside down in a row, dust-free and out of the cupboard, which frees a whole shelf. Each 250 mm rail holds four glasses with feet up to 85 mm.

Customize this model

Size: 250 × 92 × 16 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 55.4 cm³
Est. weight (PLA): 68.7 g
Parts to print: 1
Category: Drawer & cabinet organisers
Made by: Krypto
Built in: 28 steps

What’s in it

Rectangular, 250 × 92 × 16 mm, with 2.4 mm walls
3 holes in the floor

How to print it

PETG; print with support under the two ledges.

Prints as shown on its floor, no supports.

Filament: at most about 68.7 g of PLA printed solid (roughly $1.37 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the stemline model?

The stemline model measures 250 × 92 × 16 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG; print with support under the two ledges. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 68.7 g of PLA (55.4 cm³ printed solid), roughly $1.37 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.