AR view

Sift Floor

Keep crumbs from collecting in drawer bays

A cutlery drawer insert with a slotted floor raised on 4 mm feet: crumbs, grit and drips fall straight through instead of packing into the corners of every bay, so cleaning means lifting the insert out and wiping the drawer, not picking out each fork.

Customize this model

Size: 290 × 110 × 49 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 109 cm³
Est. weight (PLA): 135 g
Parts to print: 1
Category: Drawer & cabinet organisers
Made by: Krypto
Built in: 21 steps

What’s in it

Rectangular, 290 × 110 × 49 mm, with 2.4 mm walls
Raised square base
3 dividers in a grid layout
1 patterned wall panel (cut-out)

How to print it

Food-safe PETG.

Prints as shown on its floor, no supports.

Filament: at most about 135 g of PLA printed solid (roughly $2.70 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the sift Floor model?

The sift Floor model measures 290 × 110 × 49 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Food-safe PETG. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 135 g of PLA (109 cm³ printed solid), roughly $2.70 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.