Starfix

Show a constellation with a dedication

The seven stars of the Plough, the constellation people have navigated by for centuries, pierced through the face of a 150 mm block with the name and a date beneath. Drop an LED tealight or puck in through the open top and the stars glow; choose the night that matters (the first trip, the proposal).

Customize this model

Size: 150 × 30 × 100 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 13.5 cm³
Est. weight (PLA): 16.7 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 43 steps

What’s in it

Rectangular, 150 × 30 × 100 mm, with 2.4 mm walls
7 holes in the walls
Engraved text: “THE PLOUGH 12.08.2025”

How to print it

Print in dark blue or black so the lit stars stand out.

Prints as shown on its floor, no supports.

Filament: at most about 16.7 g of PLA printed solid (roughly $0.33 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the starfix model?

The starfix model measures 150 × 30 × 100 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in dark blue or black so the lit stars stand out. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 16.7 g of PLA (13.5 cm³ printed solid), roughly $0.33 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.