Elsewhere

Frame a postcard of your next trip in a doorway

A doorway to the next place you are going. A 150 mm block has an arched door cut through its face, and a postcard dropped into the slot behind fills the doorway with Kyoto, a beach or a mountain. Swap the card when the plan changes; the lintel names the destination.

Customize this model

Size: 120 × 26 × 150 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 29.2 cm³
Est. weight (PLA): 36.2 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 23 steps

What’s in it

Rectangular, 120 × 26 × 150 mm, with 2.4 mm walls
1 divider
1 hole in the walls
Engraved text: “NEXT: KYOTO”

How to print it

Print upright. Holds a portrait postcard (105 x 148).

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 36.2 g of PLA printed solid (roughly $0.72 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the elsewhere model?

The elsewhere model measures 120 × 26 × 150 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Print upright. Holds a portrait postcard (105 x 148). Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 36.2 g of PLA (29.2 cm³ printed solid), roughly $0.72 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.