Thankwell

Collect a daily note of thanks inside a column

A tall gratitude stele with a slot in its crown. Write one thing you are thankful for on a slip of paper each day, fold it and post it in; on New Year's Eve lift the column off its notes and read the year back. The front carries the year and a short line. Print it as shown, then turn it over so the floor becomes the top.

Customize this model

Size: 80 × 60 × 150 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 14.2 cm³
Est. weight (PLA): 17.5 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 22 steps

What’s in it

Rectangular, 80 × 60 × 150 mm, with 2.4 mm walls
1 hole in the floor
Engraved and raised text: “THANKFUL FOR”, “2027”

How to print it

Print open end up, then stand it on its open end.

Print floor-down as shown, then turn it over to use it.

Filament: at most about 17.5 g of PLA printed solid (roughly $0.35 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the thankwell model?

The thankwell model measures 80 × 60 × 150 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print open end up, then stand it on its open end. Print floor-down as shown, then turn it over to use it.

How much filament does it use?

At most about 17.5 g of PLA (14.2 cm³ printed solid), roughly $0.35 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.