Fogfall

Make incense smoke pour from a temple door

A temple that pours fog. Stand a backflow incense cone in the shrine on the roof: its smoke sinks through the roof into the hollow tower and rolls out of the arched door like a slow waterfall into the courtyard pool. Fluted pilasters run up the sides; the pool catches the ash.

Customize this model

Size (Base A): 70 × 70 × 70 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 38.3 cm³
Est. weight (PLA): 47.5 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 46 steps

What’s in it

Rectangular, 70 × 70 × 70 mm, with 2.4 mm walls
3 holes in the floor and walls
2 patterned wall panels (raised)
3 more bases built on (Bases B–D)
Base B: rectangular, 70 × 70 mm (stacked)
Base C: rectangular, 40 × 40 mm, 14 mm tall (stacked)
Base D: rectangular, 110 × 60 mm, 12 mm tall (beside)

How to print it

PETG or PLA; use backflow cones only and never leave them burning unattended.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

Filament: at most about 47.5 g of PLA printed solid (roughly $0.95 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the fogfall model?

The fogfall model measures 70 × 70 × 70 mm (width × depth × height). That is Base A; 3 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. PETG or PLA; use backflow cones only and never leave them burning unattended. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

How much filament does it use?

At most about 47.5 g of PLA (38.3 cm³ printed solid), roughly $0.95 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.