Spoon Blank

Mark out a carving spoon blank

Lay the template on a split green-wood blank with the notches on the grain line and draw round it: you get a well-proportioned eating spoon, a 46 mm bowl on a 190 mm handle, ready to axe and carve, and every spoon in a set comes out the same size.

Customize this model

Size: 46 × 196 × 8 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 13.9 cm³
Est. weight (PLA): 17.3 g
Parts to print: 1
Category: Woodworking
Made by: Krypto
Built in: 12 steps

What’s in it

Custom outline, 46 × 196 × 8 mm, with 3.0 mm walls
Custom outline traced from a shape
Engraved text: “GRAIN”

How to print it

PLA, printed flat.

Prints flat as a plate, no supports.

Filament: at most about 17.3 g of PLA printed solid (roughly $0.35 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the spoon Blank model?

The spoon Blank model measures 46 × 196 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PLA, printed flat. Prints flat as a plate, no supports.

How much filament does it use?

At most about 17.3 g of PLA (13.9 cm³ printed solid), roughly $0.35 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.