Sheet Mule

Carry big sheets of board single-handed

Carry a full sheet of plywood or plasterboard on your own: hook the bottom edge into the J, stand the sheet on edge against your side and lift by the top handle. Your arm hangs straight, the board stays vertical and the sheet no longer needs two people or a wide arm span.

Customize this model

Size: 85 × 200 × 60 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 200 cm³
Est. weight (PLA): 248 g
Parts to print: 1
Category: Woodworking
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 85 × 200 × 60 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

PETG at 100 % infill, printed on its side.

Filament: at most about 248 g of PLA printed solid (roughly $4.96 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the sheet Mule model?

The sheet Mule model measures 85 × 200 × 60 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. PETG at 100 % infill, printed on its side.

How much filament does it use?

At most about 248 g of PLA (200 cm³ printed solid), roughly $4.96 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.