Pyrography tip vault — 3D-printable model preview

AR view

Woodworking Multi-part assembly

Pyrography tip vault

File wood-burning tips by shape

A slotted box for wood-burning pen tips. Eight narrow slots keep the shaders, writers, spoons and ball tips apart, so their faces don't chip against each other, and each one can be picked out by shape. The lid reminds you: COLD TIPS ONLY.

Customize this model

Size: 150 × 70 × 22 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 99.6 cm³
Est. weight (PLA): 124 g
Parts to print: 2
Category: Woodworking
Made by: Krypto
Built in: 43 steps

What’s in it

Rectangular, 150 × 70 × 22 mm, with 2.4 mm walls
7 dividers
Engraved text: “COLD TIPS ONLY”
Lift-off lid (prints separately)

How to print it

Only put tips away cold.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 124 g of PLA printed solid (roughly $2.47 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pyrography tip vault model?

The pyrography tip vault model measures 150 × 70 × 22 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Only put tips away cold. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 124 g of PLA (99.6 cm³ printed solid), roughly $2.47 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More woodworking

Router table featherboard

Keep wood pressed against a fence

Medium

Wooden dovetail marker

Mark dovetail joints

Simple

Board centre finder

Mark the centre line of a board edge

Advanced

Jointer and router push block

Feed boards safely past a cutter

Advanced

Spoon Blank

Mark out a carving spoon blank

Simple

Sheet Mule

Carry big sheets of board single-handed

Simple

Rim Taper

Read bowl wall thickness at the lathe

Medium

Pen-blank rack

Store wooden and acrylic pen-turning blanks upright by species

Medium

See all 31 in Woodworking

Make it fit your space

Change the size, walls, dividers, holes and labels of the pyrography tip vault model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model