Rim Taper

Read bowl wall thickness at the lathe

Slide the tapered slot onto the rim of a bowl with the lathe stopped: it stops where the gap matches the wall, and the engraved number beside that point reads the thickness, from 12 down to 3 mm, without fetching callipers. Long jaws reach 90 mm down over a lip.

Customize this model

Size: 120 × 70 × 10 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 37.6 cm³
Est. weight (PLA): 46.6 g
Parts to print: 1
Category: Woodworking
Made by: Krypto
Built in: 30 steps

What’s in it

Custom outline, 120 × 70 × 10 mm, with 5.0 mm walls
Custom outline traced from a shape
Engraved text: “10”, “8”, “6”, “4”

How to print it

PETG, printed flat.

Prints flat as a plate, no supports.

Filament: at most about 46.6 g of PLA printed solid (roughly $0.93 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the rim Taper model?

The rim Taper model measures 120 × 70 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG, printed flat. Prints flat as a plate, no supports.

How much filament does it use?

At most about 46.6 g of PLA (37.6 cm³ printed solid), roughly $0.93 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.