Socket-hung charger shelf — 3D-printable model preview

AR view

Cables & charging Simple

Socket-hung charger shelf

Hold a charging phone on a shelf that hangs from its own charger plug

A phone charging from a low socket ends up on the floor, dangling or tripping someone up. This shelf needs no screws: the plug-in charger sits inside it, pins out through the hole in the back, and when you plug it in, the charger itself holds the shelf flat against the wall below the switch. The phone stands in the front, its cable coiled out of sight behind it. It works with UK, European and US two-pin and three-pin chargers.

Customize this model

Size: 90 × 55 × 90 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 11.7 cm³
Est. weight (PLA): 14.5 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 21 steps

What’s in it

Rectangular, 90 × 55 × 90 mm, with 2.4 mm walls
1 hole in the walls

How to print it

Push the charger's pins out through the back hole and plug it in: the charger holds the shelf against the wall. The phone stands in front.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 14.5 g of PLA printed solid (roughly $0.29 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the socket-hung charger shelf model?

The socket-hung charger shelf model measures 90 × 55 × 90 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Push the charger's pins out through the back hole and plug it in: the charger holds the shelf against the wall. The phone stands in front. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 14.5 g of PLA (11.7 cm³ printed solid), roughly $0.29 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More cables & charging

Weighted cable-end anchor

Stop charging cables sliding off the desk

Simple

RJ45 broken-latch repair clip

Fix a network cable with a snapped latch

Simple (set)

Standing desk cable spine links

Guide cables up a standing desk

Medium

Monitor arm cable clip

Route cables along a monitor arm

Simple (set)

Laptop one-push port block

Dock a laptop with one push

Multi-part assembly

Parabolic Wi-Fi booster

Beam a router's Wi-Fi towards the room that needs it with a foil-lined parabola

Simple

Smart-glasses charging dock

Charge smart glasses folded in a dock at night

Simple

Retro-TV phone stand

Stand a phone behind the screen of a retro television

Medium

See all 44 in Cables & charging

Make it fit your space

Change the size, walls, dividers, holes and labels of the socket-hung charger shelf model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model