Retro-TV phone stand — 3D-printable model preview

AR view

Cables & charging Medium

Retro-TV phone stand

Stand a phone behind the screen of a retro television

A phone stand shaped like an old cathode-ray television. The phone stands sideways inside and its screen fills the TV's rounded front window, so a video call or a recipe looks as if it is on a 1970s set. CH 3 is under the screen, and the charging cable leaves through the back.

Customize this model

Size: 170 × 90 × 120 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 67.5 cm³
Est. weight (PLA): 83.7 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 38 steps

What’s in it

Rectangular, 170 × 90 × 120 mm, with 2.4 mm walls
1 divider
2 holes in the walls
Raised text: “CH 3”

How to print it

The phone stands inside on its side, filling the screen; the cable leaves through the back.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 83.7 g of PLA printed solid (roughly $1.67 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the retro-TV phone stand model?

The retro-TV phone stand model measures 170 × 90 × 120 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. The phone stands inside on its side, filling the screen; the cable leaves through the back. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 83.7 g of PLA (67.5 cm³ printed solid), roughly $1.67 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More cables & charging

Weighted cable-end anchor

Stop charging cables sliding off the desk

Simple

RJ45 broken-latch repair clip

Fix a network cable with a snapped latch

Simple (set)

Standing desk cable spine links

Guide cables up a standing desk

Medium

Monitor arm cable clip

Route cables along a monitor arm

Simple (set)

Laptop one-push port block

Dock a laptop with one push

Multi-part assembly

Smart-glasses charging dock

Charge smart glasses folded in a dock at night

Simple

Smart-ring charging nest

Charge a smart ring overnight with its spare sizer beside it

Simple

Octopus cable tidy

Lay eight charging cables in the arms of an octopus

Simple

See all 44 in Cables & charging

Make it fit your space

Change the size, walls, dividers, holes and labels of the retro-TV phone stand model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model