Smart-ring charging nest — 3D-printable model preview

AR view

Cables & charging Simple

Smart-ring charging nest

Charge a smart ring overnight with its spare sizer beside it

A bedside nest for smart-ring wearers. The charging dock sits in the larger bay with its cable out of the back, and the small bay keeps the sizing ring or a wedding band while the smart ring charges. It is small enough to share a nightstand with a phone.

Customize this model

Size: 96 × 62 × 22 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 17.2 cm³
Est. weight (PLA): 21.3 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 23 steps

What’s in it

Rectangular, 96 × 62 × 22 mm, with 2.4 mm walls
1 divider
1 hole in the walls

How to print it

The big bay takes most smart-ring charging docks; the cable leaves through the back.

Prints as shown on its floor, no supports.

Filament: at most about 21.3 g of PLA printed solid (roughly $0.43 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the smart-ring charging nest model?

The smart-ring charging nest model measures 96 × 62 × 22 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. The big bay takes most smart-ring charging docks; the cable leaves through the back. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 21.3 g of PLA (17.2 cm³ printed solid), roughly $0.43 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More cables & charging

Weighted cable-end anchor

Stop charging cables sliding off the desk

Simple

RJ45 broken-latch repair clip

Fix a network cable with a snapped latch

Simple (set)

Standing desk cable spine links

Guide cables up a standing desk

Medium

Monitor arm cable clip

Route cables along a monitor arm

Simple (set)

Laptop one-push port block

Dock a laptop with one push

Multi-part assembly

Octopus cable tidy

Lay eight charging cables in the arms of an octopus

Simple

Handheld gaming PC stand

Stand a handheld gaming PC upright while it charges

Medium

Retro-TV phone stand

Stand a phone behind the screen of a retro television

Medium

See all 44 in Cables & charging

Make it fit your space

Change the size, walls, dividers, holes and labels of the smart-ring charging nest model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model