Shutter Board — 3D-printable model preview

AR view

Jewellery & grooming Medium

Shutter Board

Hang hook earrings through louvre slots

An earring stand made like a pair of louvred shutters. Hook earrings straight through the horizontal louvre slots on the front and back faces, so every pair hangs at eye level, and the little sill tray at the foot catches studs, backs and the odd ring.

Customize this model

Size (Base A): 120 × 30 × 190 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 21.8 cm³
Est. weight (PLA): 27.0 g
Parts to print: 1
Category: Jewellery & grooming
Made by: Krypto
Built in: 27 steps

What’s in it

Rectangular, 120 × 30 × 190 mm, with 2.4 mm walls
2 patterned wall panels (cut-out)
One more base built on (Base B)
Base B: rectangular, 120 × 40 mm, 16 mm tall (beside)

How to print it

Print upright; slots bridge cleanly at 2.4 mm walls.

Prints as shown on its floor, no supports.

Filament: at most about 27.0 g of PLA printed solid (roughly $0.54 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the shutter Board model?

The shutter Board model measures 120 × 30 × 190 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright; slots bridge cleanly at 2.4 mm walls. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 27.0 g of PLA (21.8 cm³ printed solid), roughly $0.54 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More jewellery & grooming

Twin Prong

Hold a bun with a crescent-headed hair fork

Simple

Bracelet clasp helper cuff

Fasten a bracelet with one hand

Simple

Beard neckline trimming guide

Trim an even beard neckline

Simple

Ventilated wig stand

Dry and store a wig with air all round

Advanced

Watch bracelet link removal block

Shorten a metal watch bracelet at home

Medium

Riad Valet

Sort jewellery round a courtyard for watch and glasses

Medium

Abalone Row

Hold eight pairs of stud earrings and their backs

Advanced

Ringbearer

Present a ring inside a figure's lidded head

Multi-part assembly

See all 77 in Jewellery & grooming

Make it fit your space

Change the size, walls, dividers, holes and labels of the shutter Board model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model