Riad Valet

Sort jewellery round a courtyard for watch and glasses

A courtyard house for the things you take off at night. Arched windows pierce all four walls, an inner wall makes a covered gallery round the edge for rings, earrings and chains, and the open courtyard in the middle takes the watch, glasses and wallet, like a riad built around its garden.

Customize this model

Size: 150 × 150 × 46 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 94.2 cm³
Est. weight (PLA): 117 g
Parts to print: 1
Category: Jewellery & grooming
Made by: Krypto
Built in: 79 steps

What’s in it

Rectangular, 150 × 150 × 46 mm, with 3.0 mm walls
8 holes in the walls

How to print it

Arches bridge cleanly; print walls at 3 mm.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 117 g of PLA printed solid (roughly $2.34 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the riad Valet model?

The riad Valet model measures 150 × 150 × 46 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Arches bridge cleanly; print walls at 3 mm. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 117 g of PLA (94.2 cm³ printed solid), roughly $2.34 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.