Gorgonia

Hang hook and hoop earrings across a flat sea fan

An earring display shaped like a sea fan. Gorgonian corals branch in one flat plane across the current to catch food; here the fine flat branches catch earring hooks and hoops, dozens spread out in a single layer you can see through. The stem tab slots into the Haptera holdfast.

Customize this model

Size: 160 × 151 × 8 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 22.4 cm³
Est. weight (PLA): 27.8 g
Parts to print: 1
Category: Jewellery & grooming
Made by: Krypto
Built in: 5 steps

What’s in it

Custom outline, 160 × 151 × 8 mm, with 3.0 mm walls
Custom outline traced from a shape

How to print it

PETG for spring. Print flat.

Filament: at most about 27.8 g of PLA printed solid (roughly $0.56 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the gorgonia model?

The gorgonia model measures 160 × 151 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. PETG for spring. Print flat.

How much filament does it use?

At most about 27.8 g of PLA (22.4 cm³ printed solid), roughly $0.56 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.