Druse

Stand rings in a geode channel and keep studs inside

A ring keeper cut like a split geode: a thick rough rind, an agate band and a hollow core. Rings stand upright by their bands in the narrow channel between rind and band, earrings and studs drop into the core, and the telescoping lid closes the stone.

Customize this model

Size: 96 × 78 × 34 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 124 cm³
Est. weight (PLA): 153 g
Parts to print: 2
Category: Jewellery & grooming
Made by: Krypto
Built in: 11 steps

What’s in it

Custom outline, 96 × 78 × 34 mm, with 4.0 mm walls
Custom outline traced from a shape
Telescoping lid (prints separately)

How to print it

Print in stone grey; core in a silk colour if you swap filament.

Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

Filament: at most about 153 g of PLA printed solid (roughly $3.06 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the druse model?

The druse model measures 96 × 78 × 34 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in stone grey; core in a silk colour if you swap filament. Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 153 g of PLA (124 cm³ printed solid), roughly $3.06 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.